Cisco 6513 to Cisco 3750G Vlans

Discussion in 'Cisco' started by thejayman, Aug 1, 2005.

  1. thejayman

    thejayman Guest

    Hi all,
    A very simple question here.
    I have a 6513 which has multi vLans running on it. I have just created
    a new vLan (12) which I am trying to connect to a Cisco 3750G.
    I have created a vlan on the 3750G (12) and given it an IP address of
    10.228.200.2, on the 6513 vlan 12 has the IP address 10.228.200.1.
    10.228.200.1 is the default gateway of the 3750G and I have turned on
    IP Routing. I can ping both IP's form any other Vlan on my network,
    but, if I place a workstation into another port on the 3750G on the
    same subnet (10.228.200.x/24)I cannot get to it!
    Just a note, I can get to both workstation and 6513 from the 3750G.

    Helllllppppp.
    Jason
     
    thejayman, Aug 1, 2005
    #1
    1. Advertisements

  2. thejayman

    thejayman Guest

    Please ignore my last post...Both machines had Checpoint SecurClient
    installed :)
    Stop the client all is good.
    Jason
     
    thejayman, Aug 1, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.