Cisco 6200 DSLAM Question

Discussion in 'Cisco' started by Matthew M. Gamble, Nov 27, 2003.

  1. Matthew M. Gamble

    Matthew M. Gamble Guest

    Greetings. Does anyone have a Cisco 6200 DSLAM? I'm trying to get one up
    for a simple DSL test environment and am having issues with the MPC card.
    When I got the DSLAM, the MPC card had nothing in ether of the on-board 72
    pin slots (U3 and U8) and nothing in the 80 pin slot. In this configuration
    the management card just constantly flashes - what should be in these slots?
    RAM? Flash? The Cisco docs don't have any photos or notes about what the
    physical configuration of the MPC card should be.

    Thanks in advance, and please CC replies to mgamble_at_eol.ca

    Regards,

    M. Gamble
    Senior Network Administrator
    The Echo Group of Companies
     
    Matthew M. Gamble, Nov 27, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Epson EPL-6200 Laser Printer @ TrustedReviews

  2. WTB: Cisco 6200 Parts

  3. Help with a Cisco 6100 DSLAM

  4. show logging in DSLAM Cisco 6260

  5. Hooking Cisco Router to AFC DSL DSLAM

  6. cisco DSLAM output

  7. Cisco 877 does NOT support G.992.2 ITU G.Lite used by Versatel DSLAM (Netherlands)

  8. No link with Cisco 828 and new dslam

Loading...