Cisco 506e multiple external IPs?

Discussion in 'Hardware' started by Archo, Sep 26, 2006.

  1. Archo

    Archo

    Joined:
    Sep 26, 2006
    Messages:
    3
    Likes Received:
    0
    Location:
    Minnesota
    Hello,

    I have found a lot of useful Cisco info on these forums so I thought I'd give it a whirl...

    Is it possible to set multiple public IPs on the external interface of a Cisco 506e Pix? The old firewall would take requests in on ony of four IPs and then we had a NAT that would direct traffic. It was kind of like a poor man's DMZ. Now the old firewall has been replaced and I can not seem to find any option that would allow me to set multiple IPs to the external interface. What am I missing here? :hmm2:

    Any help would be greatly appreciated :)
     
    Archo, Sep 26, 2006
    #1
    1. Advertisements

  2. Archo

    Archo

    Joined:
    Sep 26, 2006
    Messages:
    3
    Likes Received:
    0
    Location:
    Minnesota
    As I dig into this further it looks like the Pix is not grabbing any traffic on any port other that it's own. I want to direct the entire subnet to the firewall but I can only seem to get one port.

    Any idea on how I can do that?
     
    Archo, Sep 26, 2006
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.