Cisco 3640 and WIC-1ADSL

Hi there. I have a 3640 running enterprise plus 12.4(8) that won't see
a WIC-1ADSL card.

The WIC card is inserted into a NM 2E 2W Network Module, along with a
WIC-1T1DSU. I have swapped WIC slots, and tried booting just with the
ADSL WIC, no luck.

The card is a known good, since it lights up to OK in a 2611.

Am I missing something here?

Any and all help is appreciated.

Thanks

Check

 

Wow found my answer. The Network Module does not support the
WIC-1ADSL. Wierd.

Note: For the Cisco 3600, ADSL is not supported on WIC NM-1E1R2W,
NM-1E2W, or NM-2E2W

Oh well, off to ebay I go.

 

Note: For the Cisco 3600, ADSL is not supported on WIC NM-1E1R2W,

You can use a NM-2FE2W module. It works for me:

router#show diag
Slot 0:
NM-2FE2W Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-04797-01
Board Revision : G0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : JAD0626CFJD
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : NM-2FE2W=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 D8 41 01 00 C0 46 03 20 00 12 BD 01
0x10: 42 47 30 80 00 00 00 00 02 05 C1 8B 4A 41 44 30
0x20: 36 32 36 43 46 4A 44 03 00 81 00 00 00 00 04 00
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:
DSL SAR (ADSL)

Hardware Revision : 2.2
Part Number : 73-4771-07
Board Revision : A0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : JAB05370J1A
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : PA-1C-P=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 2E 41 02 02 82 49 12 A3 07 42 41 30
0x10: 80 00 00 00 00 02 05 C1 8B 4A 41 42 30 35 33 37
0x20: 30 4A 31 41 03 00 81 00 00 00 00 04 00 FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

 

Not surprising at all. The NM-xE cards are old, proabably EOL, while ADSL
WICs are pretty new.

 

These are the NM's that support the WIC-1ADSL:

NM-2W
NM-1FE2W
NM-1FE2W-V2
NM-2FE2W
NM-2FE2W-V2
NM-1FE1R2W
NM-1FE1R2W-V2

I have:

1 x NM-1FE2W USED @ $450
4 x NM-1FE1R2W USED $425/each [equivalent use as NM-
1FE2W]
20 x NM-2FE2W USED @ $700/each

ALL GUARANTEED to be REAL, CISCO ORIGINAL. NO
counterfeits! Let me know if you need anything

* We buy and sell networking equipment. Please contact
me if you have any offers or are interested in
purchasing. *

Thanks,

Rick Truong
TruTech Systems
Office: 951.696.3688
Mobile: 951.440.8711
AIM: ricktrutek
E-Mail: rick at trutechsystems dot net