Cisco 3600 NAT by destination address

Discussion in 'Cisco' started by Chris Davis, May 18, 2005.

  1. Chris Davis

    Chris Davis Guest

    Hi,
    Does anyone know whether (and if so how) it is possible to configure a
    Cisco 3600 router to NAT a destination address to an IP address that is
    in the same subnet as the source host?

    E.G. if host 192.168.0.1/24 is trying to communicate with host 80.0.0.1
    and the default gateway is a cisco 3600 router Ethernet interface 0/0
    (IP address 192.168.0.254), can the router be configured to NAT the
    destination address to 192.168.0.2 and send back out its Ethernet 0/0
    interface?

    Regards
    Chris Davis
     
    Chris Davis, May 18, 2005
    #1
    1. Advertisements

  2. Chris Davis

    djd Guest

    djd, Jul 3, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.