Cisco 2960G Switch problem

Discussion in 'Cisco' started by gnfast87, Jul 21, 2008.

  1. gnfast87

    gnfast87

    Joined:
    Jul 21, 2008
    Messages:
    1
    Likes Received:
    0
    I have 4 MPLS T1's coming into an Cisco 1841 IAD. This is my vendors equipment. They are handing me an ethernet connection which I have plugged into a Cisco 2960G switch. The problem I am having is my vendor says instead of 6 meg. of MPLS coming in they are seeing something rate limiting the data stream down to 1.5 MEG. in my equipment.

    By default, the ethernet port on the switch should handle 6 meg with no problems. Correct?? I can't seem to figure out what is rate limiting the connection.

    Any ideas?

    Thanks,
    BRian
     
    gnfast87, Jul 21, 2008
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.