Cisco 2950 with Standard image and Access Lists

Discussion in 'Cisco' started by Michiel van der Kraats, Sep 7, 2005.

  1. Hi,

    I have a Cisco 2950 which is running:

    IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(20)EA1a, RELEASE
    SOFTWARE (fc1)

    and I want to use an access list to restrict IP traffic flowing through
    this switch. I know that full access-list functionalitity is only
    supported through the enhanced image but I can still define access-lists
    I just can't seem to assign them to anything.

    What I would really like is for traffic flowing into FastEthernet 0/24
    to be restricted to 1 specific Ip address. Failing that, I'd like
    traffic flowing into the switch to be restricted to one specific IP or
    even MAC.

    Am I missing something or do I really need an EI to do any of this?
     
    Michiel van der Kraats, Sep 7, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.