Cisco 2811 with HWIC-1FE

Discussion in 'Cisco' started by AlMills, Sep 12, 2007.

  1. AlMills

    AlMills

    Joined:
    Sep 12, 2007
    Messages:
    2
    Likes Received:
    0
    Location:
    Houston, TX
    I have a 2811 that I just installed a HWIC-1FE in, and the IOS wouldn't identify. Cisco had me install IOS 12.4.11-XJ4 and this identified the WIC, but broke VPN access.

    The 2811 is configured with the two internal FE interfaces going to an ISP and the internal network. The 1FE is to connect to a new ISP.

    If I revert back to the previous IOS; VPN works again, but the WIC is not identified. I have also tried a newer IOS 12.4.15T1 that Cisco recommended to try, and I lost all Internet connectivity.

    Has anyone configured a 1FE in a 2811 before?
     
    AlMills, Sep 12, 2007
    #1

    1. Advertisements

  2. AlMills

    elvis.asia

    Joined:
    Feb 25, 2010
    Messages:
    1
    Likes Received:
    0
    CISCO 2811 with HWIC

    Hi,

    Do you have a solution for the problem yet? I have the same problem and it's now looking for solution. MY 2nd WAN is not working since I purchased HWIC with my 2811 route 1 year ago. If you had already fixed the problem, please help send the solution to me. Thanks

    Elvis
    elvis @ registry.asia
     
    elvis.asia, Feb 25, 2010
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. IOS for 1FE-1CE1-B/U

  2. PIX 515 'PIX-1FE=' Problems

  3. 1FE-TX 2620

  4. 4-port FE Switch HWIC and 2811

  5. 1fe-Tx vs fe1-Fx

  6. NM-1FE-FX-V2 data sheet wanted

  7. Cisco 2811 with HWIC-4ESW

  8. Cisco 2811 w/ 4-Port HWIC

Loading...