Cisco 2801 try to configure t1

Discussion in 'Cisco' started by rdore, Dec 27, 2007.

  1. rdore

    rdore

    Joined:
    Dec 27, 2007
    Messages:
    1
    Likes Received:
    0
    We have 2 new routers 2801, with both the VWIC2-2MFT-T1. We understand we need to add the controler to the router. When I do the following, I get this error:
    configure terminal
    controler T1 0/0/0 or 0/0/1 for that matter, this is a dual card
    channel-group 0 timeslots 1-24 speed 64
    %Insufficient resources to create channel group


    Any ideas?
    Thanks,
     
    rdore, Dec 27, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Newbie: Cisco 2801 as PPTP CLient

  2. Cisco 2801 Configuration Discussion

  3. How do I configure a cisco 2801 + Etherswitch + SDSL + Cable modem ?

  4. Try, Try, Try, again...

  5. How to configure win 2k3 DNS so it won't try to register it to dns roots?

  6. How to configure 3DES on Cisco 2801 Router

  7. Need step-by-step inst. to configure 2801 router to use Windows IASRADIUS

Loading...