Cisco 2621 VLAN issue

Discussion in 'Hardware' started by CTEagle, Oct 31, 2006.

  1. CTEagle

    CTEagle

    Joined:
    Oct 27, 2006
    Messages:
    2
    Likes Received:
    0
    I have successfully configured a VLAN on a Cisco 2621 router using the following settings:

    interface FastEthernet 0/1.7
    encapsulation dot1Q 7
    ip address 192.168.7.1 255.255.255.0

    interface FastEthernet 0/1.8
    encapsulation dot1Q 8
    ip address 192.168.8.1 255.255.255.0

    Now I want to add a 3rd VLAN using the following settings:

    interface FastEthernet 0/1.9
    encapsulation dot1Q 9
    ip address 172.16.30.1 255.255.0.0

    After I added the 1.9 interface to the router, the 1.7 and the 1.8 interfaces continued to communicate between each other but neither could communicate with the 1.9 interface.

    Is it possible to set up the router so that communication can exist in the manner I described above? Am I missing a step?

    Thanks in advance.
     
    CTEagle, Oct 31, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.