Cisco 2514 Upgrade Boot ROM ?

Discussion in 'Cisco' started by mvgtcrash, Sep 8, 2005.

  1. mvgtcrash

    mvgtcrash Guest

    Hi, I have two Cisco 2514 routers, I would like to load IOS 12.3. Do I
    need to upgrade the boot ROM's on them? If so why?
    Also, would 16MB NVRAM and 16MB DRAM suffice? The IOS .bin file is
    15.4MB.

    Help!
     
    mvgtcrash, Sep 8, 2005
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cisco 2514 - Changing controller RX and TX ring and buffer sizes

  2. OID for getting MAC table from Cisco 2514

  3. 3 2514 cisco routers and 1 central Switch

  4. Need Help setting routes on Cisco 2514 router

  5. upgrading Cisco 2514 from console

  6. 2503/2514 boot rom

  7. BOOT FROM ATAPI CD-ROM. FAILURE TO BOOT.INSERT SYSTEM DISK AND PRESS ENTER.

  8. Boot ROM chip required to upgrade both a Cisco 2610 and a Cisco 2620 router to support 32 megs+ flas

Loading...