Cisco 2501 and transceiver

Discussion in 'Cisco' started by Lowell, Oct 17, 2003.

  1. Lowell

    Lowell Guest

    I want to connect two Cisco 2501's via AUI port with a transceiver on each
    router. I know that the cable must be crossover (similar devices). But my
    question is about the transceiver. I previously used a Cenrecom 210TS and
    it has a polarity light, now I just got a good deal on a Centrecom MX20T and
    wanted to know if this will work (these have a xit and rcv light). When I
    purchasd them they had an adapter cable attached to them that would also fit
    into AUI. Any experience please let me know. Thanks. BTW this is for a
    home lab.
     
    Lowell, Oct 17, 2003
    #1
    1. Advertisements

  2. Lowell

    Lowell Guest

    Nevermind. Tested them and they work fine. Also my crossover was good.
     
    Lowell, Oct 17, 2003
    #2
    1. Advertisements

  3. Lowell

    bond007 Guest

    ----------------

    Hi!
    You try with D-link Product or Surecom,
    D-link DE-853 model. You can get it anywhere
    BNS
     
    bond007, Oct 17, 2003
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.