Cisco 1801 - ADSL/PPPoE - IPSec - Static NAT ---- 56K Dial Backup - NAT Overload

Discussion in 'Cisco' started by skweetis, Dec 11, 2006.

  1. skweetis

    skweetis Guest

    I am looking for a little guidance on coming up with a configuration
    for a very complicated situation. What I'm looking to do is to run a
    PPPoE ADSL connection on a Cisco 1801. This 1801 will then need to do
    an IPSec tunnel back to a Juniper ERX.

    Also, I will need to do several Static NATs with one of the subnets
    that will be tunneled. For example, the ethernet subnet of the Cisco
    will be 192.168.100.254/24. I will then route 10.20.95.0/24 via the
    IPSec tunnel and will need to create specific Static NAT's throughout
    the subnet, such as 10.20.95.1 will equal 192.168.100.100.

    The real problem I am trying to wrap my head around is doing the Dial
    Backup and then doing a NAT Overload on the Dialer interface in
    conjunction to the vpdn pppoe dialer and the IPSec tunnel with Static
    NAT configs.

    Any thoughts or suggestions?
     
    skweetis, Dec 11, 2006
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cisco pppoe client can connect multiple pppoe sessions

  2. NAT overload with some static NAT's and a block public IP's

  3. ISDN backup ADSL on CISCO 1801

  4. IPSec tunnels + NAT overload + NAT static

  5. 1801 - PAT + NAT = NAT not working how I thought it should

  6. Cisco 3640 128D/16F PPPOE problem (cannot create pppoe protocol)

  7. Simultaneous NAT overload (internet) and NAT overlapping for IPsec

Loading...