Cisco 1700 to Ascend router...ISDN

Discussion in 'Cisco' started by Geremy Meyers, Feb 28, 2004.

  1. I've got a WAN scenario where I will connecting a Cisco 1700 and an
    Ascend router via ISDN. I will be configuring the Ascend to dial into
    the Cisco utilizing only one of the B channels, so I don't want to use
    Multi-Link PPP.
    Later on down the line, I'll be adding a second Ascend router that
    will be dialing in from a second remote location into the other B

    Has anyone configured an Ascend to dial into a Cisco? If so, do you
    mind sharing some sample configs or direct me to some resources online
    or otherwise that you may have found handy.

    I've done some researching on my own the past couple of days, and have
    only had some minor success.
    Any help would much appreciated.

    Geremy Meyers
    Geremy Meyers, Feb 28, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.