Cisca 10k latency

Discussion in 'Cisco' started by Dean, Nov 17, 2003.

  1. Dean

    Dean Guest

    Hi,
    one more question. Does anyone knows/can share the latency to
    establish a pppoeoa session for Cisco 10k ESR. I am not interested in
    throughput of the box (it can do aprox 400 pppox sessions /sec).
    The reason I am asking is because I see latency up to 8 seconds.
    More details
    I turned on debug ppp negotiation
    after I start the ppp generator, I see ppp debug messages, quick, but
    the outgoing request for radius authentication takes several seconds
    to come out and hit radius server. Is this normal behaviour or I have
    something missconfigured.
    Radius server is on the same ethernet switch as cisco 10k. This is lab
    enviroment, same subnet for radius and network interface on the
    router.

    TIA

    Dean
     
    Dean, Nov 17, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. WTB - Cisco Equipment: $10k to $500k

  2. High latency when idle, low latency when passing traffic

  3. WTB - Cisco Equipment: $10k to $500k

  4. WTB - Cisco Equipment: $10K - $500K

  5. Latency of copper vs latency of fibre?

  6. sata 10k rpm vs ata133 7200rpm

  7. WD SATA 10K rpm

  8. CISCO 10K Series sho atm interface commands

Loading...