Catalyst 6500 Content Switch Module

Discussion in 'Cisco' started by Kenny D, Sep 16, 2004.

  1. Kenny D

    Kenny D Guest


    I have a 6500 with a CSM and i am trying to get my head around
    configuring it.
    I have a question regarding the default gateway for the real servers.
    Cisco doco
    says that for single subnet mode the gw is the client MSFC interface
    and for router mode it is the CSM.

    In cisco doco i have seen, for single subnet mode no client nat is
    used. It also states that the real servers default gateway should be
    the client-side router. If that is the case would return traffic not
    route directly to the client and thus bypass the CSM causing half-open
    sessions? Or am i missing something?

    Kenny D, Sep 16, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.