catalyst 3750

Discussion in 'Cisco' started by chucho11028, Sep 29, 2011.

  1. chucho11028

    chucho11028 Guest

    I am trying to configure two switch layer 3, catalyst 3750 and
    catalyst 3560 with eigrp but I received the message "IP-EIGRP(Default-
    IP-Routing-Table:10): Neighbor not on comm
    on subnet for GigabitEthernet1/0/23 *"

    1. First, I configured no switch in the port 23 (3750) and port
    2. Second, I configured ip address (3750)
    and ip address (3560).
    3. Third, I configured router eigrp 10 and network (3750).
    Then, router eigrp 10 and network (3560).

    why don't the link doesn't work?
    I apreciated any help
    chucho11028, Sep 29, 2011
    1. Advertisements

  2. There's your clue. <>

    Change to or to and you
    should have more luck.

    Martin Gallagher, Sep 30, 2011
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.