Catalyst 3524 port LED problem...

Discussion in 'Cisco' started by dustin.smous, Jul 21, 2010.

  1. dustin.smous

    dustin.smous

    Joined:
    Jul 21, 2010
    Messages:
    1
    Likes Received:
    0
    I have a Catalyst 3524 with an odd problem....

    The first 4 port leds don't show link or traffic when Ethernet cables are attached, or when mode is switched to 'UTIL'...

    They do all function fine during the post sequence at startup...

    here's the IOS version...

    IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)

    Any ideas???
     
    dustin.smous, Jul 21, 2010
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Port security on a Catalyst 4000 - fails to shut down port

  2. Catalyst 3524 unicast flooding

  3. LED there be Light, a D.I.Y. LED ringlight

  4. Catalyst 3524-XL; 'No switchport in the selection' error in CCMS

  5. initial setup catalyst 3524 powered switch

  6. redundancy and load balancing between catalyst 3524-XL and catalyst3548-XL

  7. Cisco Router 2610 and Catalyst 3500XL (3524)

  8. Cisco Router 2610 and Catalyst 3500XL (3524)

Loading...