catalyst 2950 acl on VLAN

Discussion in 'Cisco' started by Rick, Dec 1, 2003.

  1. Rick

    Rick Guest

    Hello, I installed a new IOS on my 2950

    IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(19)EA1, RELEASE SOFTWARE
    (fc2)
    Copyright (c) 1986-2003 by cisco Systems, Inc.
    Compiled Thu 23-Oct-03 18:40 by yenanh

    I'd like to be able to protect the management vlan with ACLs.
    the management VLAN has an IP Address and there is another computer on hte VLAN.
    I would like to protect access t othat computer using the catalyst ACLS.
    I am not able to do it because ACL works only for the IP subnet of
    the IP Address of the management VLAN.
    How can I Solve this problem?
    maybe it is not possible to use the catalyst 2950 as a packet filter ?

    thanks

    Rick
     
    Rick, Dec 1, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. catalyst 2950 vlan problem

  2. Cisco catalyst 2950-24 and three vlan's

  3. Catalyst 2950 & multi-VLAN ports (newbie question)

  4. Errors on Interface Vlan 1 on Catalyst 2950

  5. asa 5510 to Catalyst 2950 vlan and trunking

  6. anyone know about: vlan trunking with catalyst 1900 to any other iosdevice (catalyst 2950)

  7. DD-WRT and Catalyst 2950 VLAN ACL?

  8. Dealing with ACL limitations on Catalyst 2950 switch

Loading...