Can't complete configuration of PIX 515E

Discussion in 'Cisco' started by arie01, Mar 4, 2010.

  1. arie01


    Mar 3, 2010
    Likes Received:

    I need help resolving an issue with our PIX 515E configuration.
    Basically, I need to configure the inside interface for DHCP and NAT then make sure I have access to the Internet.

    Here is my initial config but I'm not sure what to do next. I tried a few config options but they didn't work. I was only able to ping the inside interface IP address but not the outside or hosts on the Internet.

    pix# sh config
    : Saved
    : Written by enable_15 at 10:32:14.102 EST Thu Mar 4 2010
    PIX Version 6.3(3)
    interface ethernet0 auto
    interface ethernet1 auto
    interface ethernet2 auto shutdown
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    nameif ethernet2 intf2 security4
    enable password wsuSXY3rR40kuiRc encrypted
    passwd R2aXKAtUkgkEW2aD encrypted
    hostname pix
    domain-name domain
    clock timezone EST -5
    clock summer-time EDT recurring
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    pager lines 24
    mtu outside 1500
    mtu inside 1500
    mtu intf2 1500
    ip address outside
    ip address inside
    no ip address intf2
    ip audit info action alarm
    ip audit attack action alarm
    pdm location inside
    pdm location inside
    pdm history enable
    arp timeout 14400
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server RADIUS protocol radius
    aaa-server LOCAL protocol local
    http server enable
    http inside
    http inside
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet timeout 5
    ssh inside
    ssh timeout 30
    console timeout 0
    dhcpd address inside
    dhcpd dns
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd auto_config outside
    dhcpd enable inside
    terminal width 80

    I also need to perform port-forwarding or the equivalent on PIX, from a specific external IP to a specific internal IP and port, lets say from to, how do I accoplish this?

    Thank you,
    arie01, Mar 4, 2010
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.