Cannot access local resources behind pix 506e

Discussion in 'Cisco' started by Jamie M, Jul 28, 2004.

  1. Jamie M

    Jamie M Guest

    I have a pix 506e in place that does internal nat. Behind the pix
    there is a web and ftp server and my computer. People from outside
    can access the servers fine on the specified ports. However I cannot
    access the servers using the outside ip address. If I am outside of
    the network I can browse to www.mydomain.com but when I am behind the
    pix it will not see the www.mydomain.com. I know I can setup my DNS
    to point www.mydomain.com to the internal ip of the web server but I
    do not want to create dns entries for every website on my server. Is
    there a way to get around this issue. I was told that the cisco does
    not allow a request from the inside to o out and come back in.
     
    Jamie M, Jul 28, 2004
    #1
    1. Advertisements

  2. Jamie M

    òTTó Guest

    Use alias command

    alias 10.1.1.1 209.165.xxx.yyy 255.255.255.255
     
    òTTó, Jul 29, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.