Callback and DDR Profiles problems or is it to do with isdn?

Discussion in 'Cisco' started by Phil, Feb 26, 2004.

  1. Phil

    Phil Guest

    I'm trying to get callback to work and have tried most of the config
    suggestions I can find, all without success. The closest I've got is
    that the client says that callback has been negotiated but the call is
    never dropped. On the callback server it says that no profile is
    found for the client username. Just before I gave up last night, I
    noticed this debug info on the callback server (2610 client is a 1603)
    - I don't see any caller number but on the client side I do see the
    incoming call. Could this be why callback is not working?


    25w5d: ISDN BR1/3: RX <- SETUP pd = 8 callref = 0x04
    25w5d: Sending Complete
    25w5d: Bearer Capability i = 0x8890
    25w5d: Channel ID i = 0x89
    25w5d: Progress Ind i = 0x8083 - Origination address is
    25w5d: Calling Party Number i = 0x0080, '737'
    25w5d: Low Layer Compat i = 0x8890
    25w5d: IE out of order or end of 'private' IEs --
    Calling Party Number i = 0x0080, '737'
    25w5d: ISDN BR1/3: Incoming call id = 0x2F8, dsl 11
    25w5d: ISDN BR1/3: received HOST_INCOMING_CALL call_id 0x2F8
    25w5d: ISDN BR1/3: llc valid, speed 64, call type is DATA
    speed:0 async:N
    25w5d: ISDN BR1/3: HOST_INCOMING_CALL: voice_answer_data = FALSE
    25w5d: ISDN BR1/3: Event: Received a DATA call from 737 on B1 at 64
    25w5d: ISDN BR1/3: RM returned call_type 0 resource type 0
    25w5d: ISDN BR1/3: isdn_send_connect(): msg 4, call id 0x2F8, ces 1
    bchan 0, call type DATA
    25w5d: %LINK-3-UPDOWN: Interface BRI1/3:1, changed state to up
    25w5d: %ISDN-6-CONNECT: Interface BRI1/3:1 is now connected to 737
    25w5d: BR1/3:1 PPP: Treating connection as a callin
    25w5d: BR1/3:1 PPP: Phase is ESTABLISHING, Passive Open
    25w5d: BR1/3:1 LCP: State is Listen
    Phil, Feb 26, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.