C837 High value BER valid sec

Discussion in 'Cisco' started by Tom Lauwereins, Apr 26, 2005.

  1. On one of our 837's we have a very high value for "BER Valid Sec"
    What does this mean?
    Any ideas?

    rt-*****-a036#sh dsl int atm 0
    ATU-R (DS) ATU-C (US)
    Modem Status: Showtime (DMTDSL_SHOWTIME)
    DSL Mode: ANSI T1.413
    ANSI Issue/rev: 2/1 2/1
    Vendor ID: 0x0022 0x0022
    Capacity Used: 23% 47%
    Noise Margin: 23.5 dB 23.0 dB
    Output Power: 20.0 dBm 12.0 dBm
    Attenuation: 32.5 dB 14.0 dB
    Defect Status: None None
    Last Fail Code: None
    Selftest Result: 0x49
    Subfunction: 0x15
    Interrupts: 666 (1 spurious)
    Activations: 1
    Init FW: embedded
    Operartion FW: embedded
    SW Version: 3.8129
    FW Version: 0x1A04

    Interleave Fast Interleave
    Fast
    Speed (kbps): 0 1120 0 384
    Reed-Solomon EC: 0 0 0 0
    CRC Errors: 0 0 0 0
    Header Errors: 0 0 0 0
    Bit Errors: 0 0
    BER Valid sec: 0 *13537*
    BER Invalid sec: 0 0
     
    Tom Lauwereins, Apr 26, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.