Bonding / Binding multiple interface into 1

Discussion in 'Case Modding' started by netguy2000, Aug 29, 2007.

  1. netguy2000

    netguy2000

    Joined:
    Aug 29, 2007
    Messages:
    5
    Likes Received:
    0
    I have 4 DSL modems connected with 4 different ISP's my scenario is
    a) My FC-2 machine with LAN IP=192.168.10.1 and Bond0 IP=192.168.1.1
    b) Modem-A LAN IP= 192.168.1.2 , ext IP=xxx.xxx.xxx.xxx
    c) Modem-B LAN IP=192.168.1.3, ext IP=xxx.xxx.xxx.xxx
    d) Modem-C LAN IP=192.168.1.4, ext IP=xxx.xxx.xxx.xxx
    e) Modem-D LAN IP=192.168.1.5, ext IP=xxx.xxx.xxx.xxx

    Modem-A, B, C, and D LAN connected with my FC-2 machine, and all 4 interfaces of my machine are in Bond0,
    Now please help me what default Gateway I should set in my FC-2 machine?>??? or I have to set 4 gateways in my machine??
    and will this configuration works??

    (my scenario will also listed in my home page, please visit Linux section for better understanding)

    Please help me in this problem.:hmm2:

    Thanks in advance.
    Rizwan.
    homepage: http://freewaresolutions.150m.com
     
    netguy2000, Aug 29, 2007
    #1

    1. Advertisements

  2. netguy2000

    bigal

    Joined:
    Jul 1, 2005
    Messages:
    1,485
    Likes Received:
    1
    Location:
    Northern Virginia, USA
    I have no idea on what to recommend. Anyone out there that can help?
     
    bigal, Oct 31, 2007
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Question on bonding 2 T1s with an Adtran TSU120e

  2. Bonding SHDSL lines

  3. Bonding two T1s

  4. Bonding 2 T1's

  5. Channel Bonding/Load Balancing accross 2 ADSL lines.

  6. Bonding over mulitple cisco 3750?

  7. Bonding serial leased lines on 2600 router?

Loading...