BGP Fail Over Monitoring

Discussion in 'Cisco' started by prk016, Aug 23, 2012.

  1. prk016

    prk016

    Joined:
    Aug 23, 2012
    Messages:
    1
    Likes Received:
    0
    Hi All,

    I need to fetch reports for wan circuit fail over that occured in less than 40 sec.

    I am using network node manager for network monitoring and reporting,

    I suppose there is possibility of this report using mib, but am not very much sure about parameters in MIB which finds BGP state change interval,

    please help me how this wan circuit fail over happens, how can i take this fail over duation as reports ?

    Thanks
     
    prk016, Aug 23, 2012
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PIX 515e Fail-over

  2. fail-over ethernet uplink?!

  3. To BGP or not to BGP (multihoming with ISPs over uneven links speed)?!?

  4. Using HSRP for fail over from Frame Relay to DSL

  5. Fail over from a LAN to a WAN link

  6. BGP fail-over

  7. VOIP over VPN over TCP over WAP over 3G

Loading...