Belkin F1UP0001uk print server problems

Discussion in 'Wireless Networking' started by Guest, Nov 26, 2005.

  1. Guest

    Guest Guest

    Have spent hours getting to a point where I can print wirelessly only by
    rebooting the laptop and then printing one document. Further prints fail -
    unless laptop rebooted. Print Server connected wirelessly to a Dlink
    DSL-G602T modem/router. I reckon that, since the print server WLAN light is
    flickering intermittently the whole time - even when the machine is switched
    off - that the print is not completed properly and that the print server does
    not receive a print end instruction. This is borne out also after rebooting
    and printing that only 99% of the print job is performed - it never gets to
    100%. Has anyone else seen this problem - and has anyone fixed it? Or else
    the print server will have to go back to the store!
     
    Guest, Nov 26, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.