Bandwidth control on a Cisco 1721?

Discussion in 'Cisco' started by Larry, Sep 22, 2004.

  1. Larry

    Larry Guest

    We recently upgraded to a Cisco 1721 as our internet access point for our
    dozen client workstations and several web servers. We're running IOS
    C1700-ADVSECURITYK9-M), Version 12.3(8)T1 and the Cisco SDM web management
    software Version 1.2 with 128 mb of Total Memory and 32 mb of Flash Memory.

    The problem is, several of our client workstations have a tenancy to 'hog'
    too much bandwidth during some downloads and online gaming. We understand
    there is a way control bandwidth from within the 1721, but don't know what
    the protocol is named.

    What would you recommend we use to allocate bandwidth to a few select client
    workstations? Ideally we want to set a maximum upload rate and a maximum
    download rate in the router for a couple workstations by internal IP.

    Thanks!

    (¯`·._.· £ãrrÿ ·._.·´¯)
     
    Larry, Sep 22, 2004
    #1
    1. Advertisements

  2. try the committed access rate (car) section of qos.

    sven

    Larry wrote:
    > We recently upgraded to a Cisco 1721 as our internet access point for our
    > dozen client workstations and several web servers. We're running IOS
    > C1700-ADVSECURITYK9-M), Version 12.3(8)T1 and the Cisco SDM web management
    > software Version 1.2 with 128 mb of Total Memory and 32 mb of Flash Memory.
    >
    > The problem is, several of our client workstations have a tenancy to 'hog'
    > too much bandwidth during some downloads and online gaming. We understand
    > there is a way control bandwidth from within the 1721, but don't know what
    > the protocol is named.
    >
    > What would you recommend we use to allocate bandwidth to a few select client
    > workstations? Ideally we want to set a maximum upload rate and a maximum
    > download rate in the router for a couple workstations by internal IP.
    >
    > Thanks!
    >
    > (¯`·._.· £ãrrÿ ·._.·´¯)
    >
    >
     
    Sven Juergensen, Sep 22, 2004
    #2
    1. Advertisements

  3. Larry

    Larry Guest

    "Sven Juergensen" <> wrote in message
    news:ciqv6k$9hf$...
    > try the committed access rate (car) section of qos.
    >
    > sven


    Thanks Sven!

    Larry
     
    Larry, Sep 22, 2004
    #3
    1. Advertisements

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
  1. Jon Jonsson
    Replies:
    0
    Views:
    2,383
    Jon Jonsson
    Dec 29, 2003
  2. Jon Nicoll

    Bandwidth control with Cisco 3550?

    Jon Nicoll, Sep 3, 2004, in forum: Cisco
    Replies:
    6
    Views:
    2,650
  3. maxxot2004

    Error message on a cisco 1721

    maxxot2004, Sep 13, 2004, in forum: Cisco
    Replies:
    1
    Views:
    4,015
    micke
    Sep 13, 2004
  4. smokey
    Replies:
    1
    Views:
    769
  5. Scooter
    Replies:
    1
    Views:
    1,216
    BradReeseCom
    Feb 25, 2005
  6. Abbass \(\)
    Replies:
    0
    Views:
    2,498
    Abbass \(\)
    Feb 14, 2006
  7. Replies:
    1
    Views:
    1,558
    www.BradReese.Com
    Jun 18, 2006
  8. astormchaser
    Replies:
    1
    Views:
    970
    Trendkill
    Jun 16, 2007
Loading...