Asterisk as a soft switch

Discussion in 'VOIP' started by MyName, Mar 8, 2005.

  1. MyName

    MyName Guest

    I'm trying to get a clue how much PC horse power I might need to
    create a dial plan where T1 inbound connections would be cross-connect
    to outbound T1.

    In other words, this would be a "Digital Cross Connect" like
    application using Asterisk.

    Total there is 10 inbound T1 circuits and 10 outbound circuits. I'm
    thinking 3 TE410P cards in two PC boxes with a network cable between
    them. The dial plan would simply select a route based on the DNIS
    digits received from the phone company.

    It is possible that all circuit could be in use for about 1 hour a
    day. No other features of Asterisk would be needed

    TIA

    Bart
     
    MyName, Mar 8, 2005
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. difference b/w layer 2 switch and layer 3 switch

  2. bridge / layer 2 switch / layer 3 switch

  3. Is a frame switch and an ISDN switch really needed?

  4. Switch/Switch problem fibre gigbit ethernet

  5. trunking between Cisco Catalyst 500 switch and other type of switch

  6. new offer. voip soft switch

  7. 3500xl switch problem loggin in to switch

  8. Asterisk to SMC TigerStack switch

Loading...