ASA5510 - VPN Client loses Gateway address after couple of minutes

Discussion in 'Cisco' started by Morph, Oct 3, 2007.

  1. Morph

    Morph Guest

    We have set up a ASA 5510 for remote VPN access. It works and when a
    client connects he gets an address like 10.11.11.2 and a gateway
    10.11.11.1 and everything works BUT after several minutes the VPN client
    loses the information about the Default Gateway. ipconfig shows no
    gateway.
    The VPN connection is still on but the client has no gateway and can't
    do anything.
    Why does the client lose information about the gateway?
    Version of the client is 5.0.01.0600 (i think it's the latest)
     
    Morph, Oct 3, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wireless Connection breaks up at every couple of minutes

  2. Wireless Connection breaks up at every couple of minutes

  3. VPN 1712 Gateway for VPN Client

  4. Cisco 3620 and IP NAT - Stops working after couple minutes

  5. VPN Client is assigning the same IP Address to both the interface andthe default gateway.

  6. Cisco VPN client loses host entry

  7. ASA5510 with Cisco VPN client. No traffic over VPN tunnel

Loading...