ASA 5520 and dynamic NAT types

Discussion in 'Cisco' started by Steve Pfister, Apr 22, 2014.

  1. Steve Pfister

    Steve Pfister Guest

    We have an ASA 5520 doing NAT translations on our network. A question has come up about the type of dynamic NAT we're using, and I'm not sure which itis (restricted cone, port restricted cone, symmetric). I think it's the first type, but I don't really have any way of testing it, and I haven't found anything in the settings or documentation to verify that. Which kind is it using, and can you change it?
     
    Steve Pfister, Apr 22, 2014
    #1

    1. Advertisements

  2. Steve Pfister

    Lutz Donnerhacke Guest

    It's never cone. Cone means: inbound allowed for anybody after an outbound
    connection was opened.
     
    Lutz Donnerhacke, May 2, 2014
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. cisco ASA 5520 crashes with 7.1(2) and 7.2(1)

  2. acl+Static nat+Dynamic Nat

  3. ASA 5520 and DMVPN

  4. Traffic scanning with ASA-5520 and CSC module

  5. Cisco ASA 5510/5520 and VLAN ? Affect IPSEC Remote User at one vlan

  6. ASA-5520 with ASA-CSC-20

  7. Asa 5520 L2TP IPSEC and Cisco 837:Challenge

Loading...