ASA 5505 site-site VPN - other site dynamic?

Discussion in 'Cisco' started by SteveB, Mar 26, 2009.

  1. SteveB


    Oct 3, 2006
    Likes Received:
    I am trying to set up a site-site VPN between two sites. The Cisco ASA 5505 has a static public IP and the site with an Adtran router has a dynamic IP on the public interface. I have successfully gotten site-site working many times when both are static, but I have never done one where the initiating site is dynamic. How do you configure this on the ASA? I tried to put as the peer IP address in the site-site vpn wizard, but it won't take it. If I try it at a command line, it takes it, but doesn't show it in the config.

    Is there a proper procedure to configure this? I understand you can possibly do it with Cisco EasyVPN, but I would like to avoid using that if at all possible.

    Last edited: Mar 26, 2009
    SteveB, Mar 26, 2009
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.