Allied Telesis AT-9924TL-EMC2 Switch Help

Discussion in 'Hardware' started by sleepy0905, Mar 10, 2017.

  1. sleepy0905

    sleepy0905

    Joined:
    Mar 10, 2017
    Messages:
    1
    Likes Received:
    0
    Hi can anyone help please we have just changed over our switch but Discovered that we don't have a manual for this switch and we are struggling to enable the web Server using the CLI so we can activate the GUI we have the manual for the AT-9924T CLI but we just keep getting error messages
     
    sleepy0905, Mar 10, 2017
    #1

    1. Advertisements

  2. sleepy0905

    Roto-Router

    Joined:
    Aug 23, 2018
    Messages:
    1
    Likes Received:
    0
    Hello,
    I am curious if you were able to locate documentation for this switch. I have previously used the AT-9924T, but I'm not sure how similar this is to that.
    Thanks,
    Andrew Cyr
     
    Roto-Router, Aug 23, 2018
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. difference b/w layer 2 switch and layer 3 switch

  2. bridge / layer 2 switch / layer 3 switch

  3. Ron Chiplin Allied Bakeries Cardiff. Project

  4. cisco => Allied telesyn

  5. help for switch to switch connection

  6. Allied telesyn & VOIP

  7. Allied Telesyn and Cisco Switches VLAN's

  8. FA: 24 port allied telesyn switch

Loading...