Aironet1200/IOS- configure WEP keys via SNMP

Discussion in 'Cisco' started by Ian Brewer, Nov 9, 2004.

  1. Ian Brewer

    Ian Brewer Guest

    Can somebody help me understand how to use SNMP to install WEP keys on my
    IOS based Aironet1200 AP?

    When the AP was running VxWorks based firmware, I could write to the
    awcDot11WEPDefaultKeysTable with KeyIndex, KeyLen and KeyValues.

    With IOS based firmware, it looks like this has table has moved to
    CISCO-DOT11-IF-MIB::cd11IfWepDefaultKeysTable but I cannot write
    new entries via SNMP.

    Any help would be greatly appreciated.

    Ian Brewer, Nov 9, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.