aironet <-> aironet bridging?

Discussion in 'Cisco' started by Sven Juergensen, Dec 15, 2004.

  1. hi people,

    is it possible to have two 1200 aps forwarding traffic
    across the radio interface without any logical
    adresses involved? i reckon this happening similar
    to a vlan, traffic just gets forwarded in between
    them per definition of both of them belonging to a
    single vlan. ideally including some sort of
    encryption also being involved.

    any pointers would be greatly appreciated.

    thank you and cheers,

    sven
     
    Sven Juergensen, Dec 15, 2004
    #1
    1. Advertisements

  2. :is it possible to have two 1200 aps forwarding traffic
    :across the radio interface without any logical
    :adresses involved? i reckon this happening similar
    :to a vlan, traffic just gets forwarded in between
    :them per definition of both of them belonging to a
    :single vlan. ideally including some sort of
    :encryption also being involved.

    Interestingly, Yes, it appears you can set up transparent bridging on
    1200's.

    http://www.cisco.com/en/US/products...figuration_guide_chapter09186a0080148696.html

    Look down to 'Configuring Filters Using the CLI' and note the link
    to the standard Cisco IOS Bridging documentation. Follow further down
    and notice that on the 1200 you are allowed to create ethertype filters
    (something that wouldn't be of much use if only IP was allowed.)
     
    Walter Roberson, Dec 16, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.