after rommon 1>conf reg 0x24(mistype) and reset ,i can't boot my cisco 2611

Discussion in 'Cisco' started by sdzht0553, Jan 25, 2006.

  1. sdzht0553

    sdzht0553 Guest

    I want change my passwd of the cisco2611,I restart the machine and
    press ctrk+break to enter the
    rommon 1>conf reg 0x24 ----------i have wrong type the 0X42 to 0x24
    and reset ,and after restart the machine ,the console output appear
    unreadable character or "System Bootstrap, Vers" and stop,I can't enter
    the rommon 1> through press ctrk+break.
    also can't enter the rommon 1> through power-on the machine and
    power-off after 5 seconds for sometimes ,

    my english is poor

    anyone can help me?
    thanks very much
    sdzht0553, Jan 25, 2006
    1. Advertisements

  2. www.BradReese.Com, Jan 25, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.