Adtran 120 and Cisco VWIC-2MFT-T1-DI

Discussion in 'Cisco' started by Randy, Aug 20, 2004.

  1. Randy

    Randy Guest

    I have a Livinston Portmaster router with an Adtran 120 unit in a
    remote branch office. I also have a Livingston Portmaster with a
    Kentrox DATASMART ADD / DROP unit in the main office.

    The Point-to-Point T1 is split between voice and data

    I am in the process of ordering a Cisco 2620 with a VWIC-2MFT-T1-DI
    card to replace the livingston and Kentrox unit in the main office.

    Has anyone successfully been able to split voice and data on P2P T1
    between an Adtran 120 unit and one the Cisco mutiplexer add / drop
    units (VWIC-2MFT-T1-DI)

    ....or does anyone think there will be problem splitting voice and data
    on the T1 between the Adtran 120 and the Cisco multiplexer units

    Thanks In Advance
     
    Randy, Aug 20, 2004
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is VWIC 2MFT E1 able to do G.703 64 kbps co-directional?

  2. VWIC-2MFT-T1 question

  3. VWIC-2MFT-T1 and creating serial interfaces

  4. Vwic 2mft t1 card for cisco 2811- config

  5. G703 Problem between Cisco VWIC-2MFT-G703 and Ericsson Minilink

  6. Need help VWIC-1MFT1-T1 - Adtran

  7. VWIC-2MFT-G703 and E1/PRI Card

  8. Is a VWIC-2MFT-T1 hot-swappable in a Cisco 3825?

Loading...