adsl router to adsl router

Discussion in 'Cisco' started by czar, May 1, 2007.

  1. czar

    czar Guest

    is it possible to join 2 cisco adsl routers over 300m twisted pair ethernet
    for the wan ports, with no dsl switch in the middle, like use them to join 2
    lans and to share internet on one end?
     
    czar, May 1, 2007
    #1
    1. Advertisements

  2. czar

    Guest Guest

    no..

    Flamer.
     
    Guest, May 1, 2007
    #2
    1. Advertisements

  3. No, ADSL requires two different types of boxes on each end. They only
    sell the one kind as CO gear to put in the COs, there are no ATU-C
    type single port boxes out there.

    You would be able to do this with two G.SHDSL boxes though. One should
    be able to be configured to be the CO end, and one the CPE end.

    Or any number of "ethernet extenders" which should dig up 1,000's of
    hits in google.
     
    Doug McIntyre, May 1, 2007
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.