adding a switch to a switch stack

Discussion in 'Cisco' started by mmark751969, Feb 26, 2008.

  1. mmark751969

    mmark751969 Guest

    i am adding a switch to a 3750 switch stack that already has 2
    switches in it. I am also running vtp in the network. I believe if i
    add this new switch i will not have to concern myself with vtp(joining
    it to the domain and adding the switch in transparent mode). Since
    this would be controlled and set in the master switch in the stack.
    Just confirming this. Thanks
    mmark751969, Feb 26, 2008
    1. Advertisements

  2. mmark751969


    Dec 16, 2007
    Likes Received:
    Correct. Just make sure you define what the switches priority level is to avoid complications if there is ever a reboot.

    Greeley, Feb 26, 2008
    1. Advertisements

  3. Correct,
    This switch will not be seen as a separate switch at all but sort of like a
    module on the already existing switch. If properly set-up of course.

    Yandy Ramirez, Feb 27, 2008
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.