4506 SupIV IOS

Discussion in 'Cisco' started by John Smith, Oct 25, 2003.

  1. John Smith

    John Smith Guest

    I am in the process of doing some field configuration of our 4506 deployment
    and I am trying to make it as simple as I can for those in the field to
    install them.

    I am building my configuration at our HUB site and loading them on the
    Compact flash, and the IOS configuration is going well, but I have run into
    a snag with the vlan.dat. I want to to go ahead and configure my vlans for
    each site and put those vlan.dat files on my compact flash to send to the
    field, but I am being told that I
    should not build the vlans on one switch and then transfer it to another
    switch.

    I would try this myself, but we have not deployed yet and I have only one
    4506.
    Has anyone dealt with this senario?

    Thanks in advance,
    John
     
    John Smith, Oct 25, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.