3200 Catalyst with a WS-x3011 2503 Blade

Discussion in 'Cisco' started by Howard Huntley, May 21, 2004.

  1. Howard Huntley

    Howard Huntley Guest

    I have a Catalyst 3200 with a WS-x3011 2503 Blade installed. I feel
    that the system is improperly configured. On the 3200 switch menu
    "Router Configuration", Network address "net Addr" the IP address of
    the router failes to appear in the menu. This is true on two of the
    switches. I can not ping out of the switch though the router to
    another network. I can telnet from the (switch 192.168.0.40), to
    (router 192.168.0.100), to (s1 192.168.2.100) to (s0 192.168.2.101) to
    (router/a 192.168.3.101) (switch/a 192.168.3.45). I can not ping from
    one router or switch to the other.
     
    Howard Huntley, May 21, 2004
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Looking for WS-x3011 blade for Catalyst 3200

  2. Destination NAT with Cisco 2503

  3. 2503(boot) Prompt on a 2503 Router

  4. Catalyst 3200/LS1010 Vlan trunking problem

  5. anyone know about: vlan trunking with catalyst 1900 to any other iosdevice (catalyst 2950)

Loading...