xmodem fail,stuck after transferring

Discussion in 'Cisco' started by realdreams, May 18, 2010.

  1. realdreams

    realdreams Guest

    It's a Cisco 3620 router with 16M*4 DRAM,16MB+8MB Flash SIMM

    Boot:
    PCMCIA Slot1: No Card Present

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    device does not contain a valid magic number
    boot: cannot open "flash:"
    boot: cannot determine first file name on device "flash:"

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    rommon 1 > xmodem -c c3620-ik9o3s6-mz.123-26.bin
    Do not start the sending program yet...
    device does not contain a valid magic number
    dir: cannot open device "flash:"

    WARNING: All existing data in flash will be lost!
    Invoke this application only for disaster recovery.
    Do you wish to continue? y/n [n]: y
    Ready to receive file c3620-ik9o3s6-mz.123-26.bin ...
    C




    after transfer is complete,nothing shows up so I restart the router





    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    device does not contain a valid magic number
    boot: cannot open "flash:"
    boot: cannot determine first file name on device "flash:"

    (previous xmodem doesn't work out)

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    PCMCIA Slot0: No Card Present

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    PCMCIA Slot1: No Card Present

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    device does not contain a valid magic number
    boot: cannot open "flash:"
    boot: cannot determine first file name on device "flash:"

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    rommon 2 > xmodem -c c3620-ik9o3s7-mz.123-22.bin
    Do not start the sending program yet...
    device does not contain a valid magic number
    dir: cannot open device "flash:"

    WARNING: All existing data in flash will be lost!
    Invoke this application only for disaster recovery.
    Do you wish to continue? y/n [n]: y
    Ready to receive file c3620-ik9o3s7-mz.123-22.bin ...
    Erasing flash at 0x317c0000
    program flash location 0x30310000


    then stuck here ,I restart it










    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    boot: cannot determine first file name on device "flash:"

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    PCMCIA Slot0: No Card Present

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    PCMCIA Slot1: No Card Present

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled

    boot: cannot determine first file name on device "flash:"

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1999 by cisco Systems, Inc.
    C3600 processor with 65536 Kbytes of main memory
    Main memory is configured to 32 bit mode with parity disabled


    rommon 2 > dir flash:
    File size Checksum File name
    15120140 bytes (0xe6b70c) 0x7f2e c3620-ik9o3s7-mz.123-22.bin
    (bad checksu
    m: 0x5bd5)




    c3620-ik9o3s6-mz.123-26.bin is 16.3MB and c3620-ik9o3s7-mz.123-22.bin
    is 14.4MB ,and I have one 8MB and one 16MB Flash SIMM installed.Will
    it work this way?or something else is wrong?



    my last try with only one 16MB SIMM,still stuck after transferring
    rommon 2 > xmodem -c c3620-ik9o3s7-mz.123-22.bin
    Do not start the sending program yet...
    File size Checksum File name
    15120140 bytes (0xe6b70c) 0x7f2e c3620-ik9o3s7-mz.123-22.bin
    (bad checksu
    m: 0x5bd5)

    WARNING: All existing data in flash will be lost!
    Invoke this application only for disaster recovery.
    Do you wish to continue? y/n [n]: y
    Ready to receive file c3620-ik9o3s7-mz.123-22.bin ...
    Erasing flash at 0x30fc0000
    program flash location 0x30660000

    stuck

    Thanks
     
    realdreams, May 18, 2010
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. bond007
    Replies:
    0
    Views:
    764
    bond007
    Nov 20, 2003
  2. bond007
    Replies:
    1
    Views:
    5,467
    Aaron
    Nov 20, 2003
  3. xmodem is read-only?

    , Mar 22, 2005, in forum: Cisco
    Replies:
    0
    Views:
    683
  4. lonomac
    Replies:
    0
    Views:
    1,458
    lonomac
    Aug 4, 2006
  5. Oli
    Replies:
    2
    Views:
    3,722
Loading...

Share This Page