wirelss networking problem

Discussion in 'Wireless Networking' started by =?Utf-8?B?anA=?=, Nov 19, 2004.

  1. My wireless networking on my laptop just stopped working...it was fine for
    about a year.
    I have a Netgear wg511t card and and a D-link di624 router.
    The I get a good signal on the laptop card, however,I get a message of
    "limited or no connectivity" in the wireless network connection status. In
    the "Properties" window, the only tabs are "general" and "advanced". There is
    no tab for "wireless networks". If I click on "view wireless networks, the
    message that pops up is" windows cannot configure the wireless connection."
    I started and stopped the WZC service. I also tried the ping command...seems
    to be fine.
    Any ideas would be much appreciated.
    Again, my internet capability and filing sharing capability were fine at
    6:30 am, but stopped working at about 9:00 am the same day.
    Thanks,
    jp
     
    =?Utf-8?B?anA=?=, Nov 19, 2004
    #1
    1. Advertising

  2. Have you tried using System Restore?

    Carey

    "jp" <> wrote in message
    news:...
    > My wireless networking on my laptop just stopped working...it was fine for
    > about a year.
    > I have a Netgear wg511t card and and a D-link di624 router.
    > The I get a good signal on the laptop card, however,I get a message of
    > "limited or no connectivity" in the wireless network connection status. In
    > the "Properties" window, the only tabs are "general" and "advanced". There
    > is
    > no tab for "wireless networks". If I click on "view wireless networks,
    > the
    > message that pops up is" windows cannot configure the wireless
    > connection."
    > I started and stopped the WZC service. I also tried the ping
    > command...seems
    > to be fine.
    > Any ideas would be much appreciated.
    > Again, my internet capability and filing sharing capability were fine at
    > 6:30 am, but stopped working at about 9:00 am the same day.
    > Thanks,
    > jp
     
    Carey Holzman, Nov 19, 2004
    #2
    1. Advertising

  3. yes-I tried system restore, however, it wouldn't restore to an ealier date.

    "Carey Holzman" wrote:

    > Have you tried using System Restore?
    >
    > Carey
    >
    > "jp" <> wrote in message
    > news:...
    > > My wireless networking on my laptop just stopped working...it was fine for
    > > about a year.
    > > I have a Netgear wg511t card and and a D-link di624 router.
    > > The I get a good signal on the laptop card, however,I get a message of
    > > "limited or no connectivity" in the wireless network connection status. In
    > > the "Properties" window, the only tabs are "general" and "advanced". There
    > > is
    > > no tab for "wireless networks". If I click on "view wireless networks,
    > > the
    > > message that pops up is" windows cannot configure the wireless
    > > connection."
    > > I started and stopped the WZC service. I also tried the ping
    > > command...seems
    > > to be fine.
    > > Any ideas would be much appreciated.
    > > Again, my internet capability and filing sharing capability were fine at
    > > 6:30 am, but stopped working at about 9:00 am the same day.
    > > Thanks,
    > > jp

    >
    >
    >
     
    =?Utf-8?B?anA=?=, Nov 19, 2004
    #3
  4. Have you tried reinstalling the driver for the wireless NIC?

    "jp" <> wrote in message
    news:...
    > yes-I tried system restore, however, it wouldn't restore to an ealier
    > date.
    >
    > "Carey Holzman" wrote:
    >
    >> Have you tried using System Restore?
    >>
    >> Carey
    >>
    >> "jp" <> wrote in message
    >> news:...
    >> > My wireless networking on my laptop just stopped working...it was fine
    >> > for
    >> > about a year.
    >> > I have a Netgear wg511t card and and a D-link di624 router.
    >> > The I get a good signal on the laptop card, however,I get a message of
    >> > "limited or no connectivity" in the wireless network connection status.
    >> > In
    >> > the "Properties" window, the only tabs are "general" and "advanced".
    >> > There
    >> > is
    >> > no tab for "wireless networks". If I click on "view wireless networks,
    >> > the
    >> > message that pops up is" windows cannot configure the wireless
    >> > connection."
    >> > I started and stopped the WZC service. I also tried the ping
    >> > command...seems
    >> > to be fine.
    >> > Any ideas would be much appreciated.
    >> > Again, my internet capability and filing sharing capability were fine
    >> > at
    >> > 6:30 am, but stopped working at about 9:00 am the same day.
    >> > Thanks,
    >> > jp

    >>
    >>
    >>
     
    Carey Holzman, Nov 19, 2004
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Henry Brummitt

    Using Windows to configure my wirelss network setting

    Henry Brummitt, Apr 15, 2005, in forum: Wireless Networking
    Replies:
    2
    Views:
    3,650
    djdave
    Feb 25, 2006
  2. Wirelss Laptop broadcast

    , Apr 16, 2005, in forum: Wireless Networking
    Replies:
    1
    Views:
    457
  3. lenny

    wirelss network advice please

    lenny, Jul 22, 2005, in forum: Wireless Networking
    Replies:
    7
    Views:
    615
  4. =?Utf-8?B?bXlzZWxm?=

    Newby Wirelss Networking

    =?Utf-8?B?bXlzZWxm?=, Mar 20, 2007, in forum: Wireless Networking
    Replies:
    2
    Views:
    434
    Jack \(MVP-Networking\).
    Mar 20, 2007
  5. rsr9797
    Replies:
    1
    Views:
    496
    Jack \(MVP-Networking\).
    Feb 3, 2008
Loading...

Share This Page