Wireless Problem with cert

Discussion in 'Wireless Networking' started by mailmann, Jul 21, 2004.

  1. mailmann

    mailmann Guest

    Hi,

    i am installing a secure wireless solution with sbs2003, IAS, stand alone
    CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
    Netgear under Radius-Clients. On the Netgear i have made the settings for
    the Radius Server with ip and shared secret and in Network Authentication i
    use WPA with Radius and in Data Encrypton TKIP.
    Problem is when the Client connects to the Access Point a error message was
    generated in the Logfiles for system: ID18 IAS error Access-Request from
    Radius-Client has an invalid Message Authenticator Attribut.

    Any help would be appreciated.
    Bernd
     
    mailmann, Jul 21, 2004
    #1
    1. Advertisements

  2. mailmann

    No One Guest

    Had the same problem. Had to use a shared secret for the access point
    and IAS of 13 characters or less to get it to work. The latest
    firmware had the same issue.

    On Wed, 21 Jul 2004 15:25:05 +0200, "mailmann" <> wrote:

    >Hi,
    >
    >i am installing a secure wireless solution with sbs2003, IAS, stand alone
    >CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
    >Netgear under Radius-Clients. On the Netgear i have made the settings for
    >the Radius Server with ip and shared secret and in Network Authentication i
    >use WPA with Radius and in Data Encrypton TKIP.
    >Problem is when the Client connects to the Access Point a error message was
    >generated in the Logfiles for system: ID18 IAS error Access-Request from
    >Radius-Client has an invalid Message Authenticator Attribut.
    >
    >Any help would be appreciated.
    >Bernd
    >
     
    No One, Jul 22, 2004
    #2
    1. Advertisements

  3. mailmann

    mailmann Guest

    I change the password and everything works fine.

    Many thanks !


    "No One" <> schrieb im Newsbeitrag
    news:...
    > Had the same problem. Had to use a shared secret for the access point
    > and IAS of 13 characters or less to get it to work. The latest
    > firmware had the same issue.
    >
    > On Wed, 21 Jul 2004 15:25:05 +0200, "mailmann" <> wrote:
    >
    > >Hi,
    > >
    > >i am installing a secure wireless solution with sbs2003, IAS, stand alone
    > >CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
    > >Netgear under Radius-Clients. On the Netgear i have made the settings for
    > >the Radius Server with ip and shared secret and in Network Authentication

    i
    > >use WPA with Radius and in Data Encrypton TKIP.
    > >Problem is when the Client connects to the Access Point a error message

    was
    > >generated in the Logfiles for system: ID18 IAS error Access-Request from
    > >Radius-Client has an invalid Message Authenticator Attribut.
    > >
    > >Any help would be appreciated.
    > >Bernd
    > >

    >
     
    mailmann, Jul 22, 2004
    #3
    1. Advertisements

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Bob F.

    To cert. or not to cert.

    Bob F., Dec 7, 2003, in forum: MCSD
    Replies:
    6
    Views:
    486
    Mas Jabier
    Dec 17, 2003
  2. |{evin

    Re: MCSE cert or no cert

    |{evin, Jul 28, 2003, in forum: MCSE
    Replies:
    0
    Views:
    517
    |{evin
    Jul 28, 2003
  3. Replies:
    0
    Views:
    1,537
  4. =?Utf-8?B?ZG90bmV0bm9vYg==?=

    is MS cert. still paper cert.?

    =?Utf-8?B?ZG90bmV0bm9vYg==?=, Jun 26, 2006, in forum: MCSD
    Replies:
    4
    Views:
    629
  5. loyola
    Replies:
    3
    Views:
    1,730
    Cerebrus
    Nov 14, 2006
Loading...

Share This Page