wireless network

Discussion in 'Wireless Networking' started by luckeyo, Mar 26, 2005.

  1. luckeyo

    luckeyo Guest

    I am trying to install a wireless network card on a laptop computer. I
    follow all of the instructions in the installation guide and the drivers all
    load properly. When I go to Contropannel>>>Driver Manager and call up the
    driver manager menu under networks the display shows the network is
    installed correctly.When I oinsert the card in the slot provided an icon
    showing the network appears, showing the machine has recognized the card.
    The instructions say to right click the network icon which brings up a third
    menue which has "view wireless networks". The instructions state to left
    click the view menue which should bring up an other menue that allows you to
    configure the wireless network. No wireless network is listed and the
    network icon has an"X" through it indication that the network probably
    cannot be contacted and activated.

    I have Norton Tools on the mchine and I am wondering if that program could
    be causing a conflect.

    Luckeyo
    luckeyo, Mar 26, 2005
    #1
    1. Advertising

  2. luckeyo

    WLW Guest

    Hi, Luckeyo -

    You may want to look at:

    http://WWW.EZine.com/TechTips
    http://WWW.EZine.com/QandA
    or
    http://www.ezlan.net/

    Hope this helps,
    --
    William L. Whipple
    WWW.EZine.Com


    "luckeyo" <> wrote in message
    news:...
    >I am trying to install a wireless network card on a laptop computer. I
    >follow all of the instructions in the installation guide and the drivers
    >all load properly. When I go to Contropannel>>>Driver Manager and call up
    >the driver manager menu under networks the display shows the network is
    >installed correctly.When I oinsert the card in the slot provided an icon
    >showing the network appears, showing the machine has recognized the card.
    >The instructions say to right click the network icon which brings up a
    >third menue which has "view wireless networks". The instructions state to
    >left click the view menue which should bring up an other menue that allows
    >you to configure the wireless network. No wireless network is listed and
    >the network icon has an"X" through it indication that the network probably
    >cannot be contacted and activated.
    >
    > I have Norton Tools on the mchine and I am wondering if that program could
    > be causing a conflect.
    >
    > Luckeyo
    >
    >
    WLW, Mar 26, 2005
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. =?Utf-8?B?SmFtZXM=?=

    Deleting a "Wireless network" created with the wireless network wi

    =?Utf-8?B?SmFtZXM=?=, Dec 13, 2005, in forum: Wireless Networking
    Replies:
    2
    Views:
    4,239
    =?Utf-8?B?S2V2aW5S?=
    Feb 3, 2006
  2. Mark
    Replies:
    0
    Views:
    2,062
  3. Jordan
    Replies:
    1
    Views:
    789
    Pavel A.
    Nov 3, 2007
  4. PL
    Replies:
    1
    Views:
    584
    Todd H.
    Nov 15, 2007
  5. Rupert
    Replies:
    1
    Views:
    889
    Rupert
    May 9, 2004
Loading...

Share This Page