WIFI Network Connection Problems

Discussion in 'Wireless Networking' started by =?Utf-8?B?TWF0dCBSb2RtYW4=?=, Nov 20, 2005.

  1. I receive my internet connection through a community WIFI service using a D
    Link wireless adapter. I was able to setup a local network using a Realtek
    Fast Ethernet NIC and a wireless access point. The local network operates
    fine.

    The problem that I have is that the wireless network connection to the
    community WIFI will connect to the community server and obtain an IP address
    but will not act as an internet connection for my local network unless I take
    the following action.

    1. I click on the internet connection icon to get the wireless connection
    staus.
    2. I click on properties and select wireless netorks
    4. The prefered netowrks lists a single wireless netork (TEOA (Automatic))
    the selection has a gray mask.
    5. If I highlight this network (TEOA (Automatic)) and click OK the
    connection will be reset and I will have an internet connection.

    How do I configure the system to do this without the extra effort?

    Thanks,
     
    =?Utf-8?B?TWF0dCBSb2RtYW4=?=, Nov 20, 2005
    #1
    1. Advertising

  2. =?Utf-8?B?TWF0dCBSb2RtYW4=?=

    Ryan Younger Guest

    Under 'Networks to access' what setting have you selected? Have you
    configured your machine to connect to any available network, infrastructure
    only or ad hoc only?


    --
    All the best,

    Ryan Younger.
    http://spaces.msn.com/members/airsick/ - My Wireless Networking Blog



    "Matt Rodman" <Matt > wrote in message
    news:...
    >I receive my internet connection through a community WIFI service using a D
    > Link wireless adapter. I was able to setup a local network using a Realtek
    > Fast Ethernet NIC and a wireless access point. The local network operates
    > fine.
    >
    > The problem that I have is that the wireless network connection to the
    > community WIFI will connect to the community server and obtain an IP
    > address
    > but will not act as an internet connection for my local network unless I
    > take
    > the following action.
    >
    > 1. I click on the internet connection icon to get the wireless connection
    > staus.
    > 2. I click on properties and select wireless netorks
    > 4. The prefered netowrks lists a single wireless netork (TEOA
    > (Automatic))
    > the selection has a gray mask.
    > 5. If I highlight this network (TEOA (Automatic)) and click OK the
    > connection will be reset and I will have an internet connection.
    >
    > How do I configure the system to do this without the extra effort?
    >
    > Thanks,
    >
     
    Ryan Younger, Nov 21, 2005
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. =?Utf-8?B?am9raW5kYTE=?=

    No "Wireless Network Connection" available in network connection

    =?Utf-8?B?am9raW5kYTE=?=, Nov 27, 2004, in forum: Wireless Networking
    Replies:
    7
    Views:
    19,391
    preeuzee
    Oct 16, 2012
  2. Phil
    Replies:
    1
    Views:
    1,444
  3. Mike
    Replies:
    5
    Views:
    925
  4. Replies:
    0
    Views:
    562
  5. Lem
    Replies:
    1
    Views:
    1,507
Loading...

Share This Page