where can i get esr capacitors?

Discussion in 'NZ Computing' started by thingy, Nov 15, 2005.

  1. thingy

    thingy Guest

    Wellington if possible,

    suitable for a computer motherboard?

    regards

    Thing
    thingy, Nov 15, 2005
    #1
    1. Advertising

  2. thingy

    colinco Guest

    In article thingy says...
    > Wellington if possible,
    >
    > suitable for a computer motherboard?
    >
    > regards
    >
    > Thing
    >

    What values? Jaycar Taranaki St have some. This has come up before
    Google this group.
    colinco, Nov 15, 2005
    #2
    1. Advertising

  3. thingy

    thing2 Guest

    colinco wrote:
    > In article thingy says...
    >
    >>Wellington if possible,
    >>
    >>suitable for a computer motherboard?
    >>
    >>regards
    >>
    >>Thing
    >>

    >
    > What values? Jaycar Taranaki St have some. This has come up before
    > Google this group.


    Thanks, it looks like only the one size has gone...

    Jaycar has some of them....1000uF 6.3 volt about 14....so the 10v ones I
    guess......though they have 16v....but size will be an issue....rated at
    105 C....

    regards

    Thing
    thing2, Nov 15, 2005
    #3
  4. thingy

    PC Guest

    "thing2" <> wrote in message
    news:...
    > colinco wrote:
    >> In article thingy says...
    >>
    >>>Wellington if possible,
    >>>
    >>>suitable for a computer motherboard?
    >>>
    >>>regards
    >>>
    >>>Thing
    >>>

    >>
    >> What values? Jaycar Taranaki St have some. This has come up before Google
    >> this group.

    >
    > Thanks, it looks like only the one size has gone...
    >
    > Jaycar has some of them....1000uF 6.3 volt about 14....so the 10v ones I
    > guess......though they have 16v....but size will be an issue....rated at
    > 105 C....
    >
    > regards
    >
    > Thing
    >




    T'g

    I've used the Jaycar 1000/10v in place of 1000/6.3v successfully on two or
    three boards now.
    In fact I've cleaned a lot of writeoff's up over the last couple of weeks
    including powersupplies with Jaycars range.

    It's finding replacements for the tall thin Lytic's that may prove difficult
    (if they turn out to be duds, none yet)

    Cheers
    Paul.
    PC, Nov 15, 2005
    #4
  5. thingy

    thing2 Guest

    PC wrote:
    > "thing2" <> wrote in message
    > news:...
    >
    >>colinco wrote:
    >>
    >>>In article thingy says...
    >>>
    >>>
    >>>>Wellington if possible,
    >>>>
    >>>>suitable for a computer motherboard?
    >>>>
    >>>>regards
    >>>>
    >>>>Thing
    >>>>
    >>>
    >>>What values? Jaycar Taranaki St have some. This has come up before Google
    >>>this group.

    >>
    >>Thanks, it looks like only the one size has gone...
    >>
    >>Jaycar has some of them....1000uF 6.3 volt about 14....so the 10v ones I
    >>guess......though they have 16v....but size will be an issue....rated at
    >>105 C....
    >>
    >>regards
    >>
    >>Thing
    >>

    >
    >
    >
    >
    > T'g
    >
    > I've used the Jaycar 1000/10v in place of 1000/6.3v successfully on two or
    > three boards now.


    I used a DSE one to fix my graphics card but I cant determine if it is
    low esr or not so will change it for a jaycar one, if Im buying 11 might
    as well buy 14.

    > In fact I've cleaned a lot of writeoff's up over the last couple of weeks
    > including powersupplies with Jaycars range.
    >
    > It's finding replacements for the tall thin Lytic's that may prove difficult
    > (if they turn out to be duds, none yet)
    >
    > Cheers
    > Paul.
    >
    >


    Which type of PSUs? Both my 350watt Enermax's stopping working within
    weeks of each other.....Tempted to open them up and see if it is a
    failed cap.

    regards

    Thing
    thing2, Nov 15, 2005
    #5
  6. thingy

    XP Guest

    XP, Nov 16, 2005
    #6
  7. thingy

    Alan Guest

    "thingy" <> wrote in message
    news:
    > Wellington if possible,
    >
    > suitable for a computer motherboard?
    >
    > regards
    >
    > Thing
    >


    Not sure if this is what you need?

    http://www.tradetech.co.nz/parts.php?vword=esr capacitor&l=a&grp=%&s=0


    HTH,

    Alan.

    --
    The views expressed are my own, and not those of my employer or anyone
    else associated with me.

    My current valid email address is:



    This is valid as is. It is not munged, or altered at all.

    It will be valid for AT LEAST one month from the date of this post.

    If you are trying to contact me after that time,
    it MAY still be valid, but may also have been
    deactivated due to spam. If so, and you want
    to contact me by email, try searching for a
    more recent post by me to find my current
    email address
    Alan, Nov 16, 2005
    #7
  8. thingy

    PC Guest

    "thing2" <> wrote in message
    news:...
    > PC wrote:
    >> "thing2" <> wrote in message
    >> news:...
    >>
    >>>colinco wrote:
    >>>
    >>>>In article thingy says...
    >>>>
    >>>>
    >>>>>Wellington if possible,
    >>>>>
    >>>>>suitable for a computer motherboard?
    >>>>>
    >>>>>regards
    >>>>>
    >>>>>Thing
    >>>>>
    >>>>
    >>>>What values? Jaycar Taranaki St have some. This has come up before
    >>>>Google this group.
    >>>
    >>>Thanks, it looks like only the one size has gone...
    >>>
    >>>Jaycar has some of them....1000uF 6.3 volt about 14....so the 10v ones I
    >>>guess......though they have 16v....but size will be an issue....rated at
    >>>105 C....
    >>>
    >>>regards
    >>>
    >>>Thing
    >>>

    >>
    >>
    >>
    >>
    >> T'g
    >>
    >> I've used the Jaycar 1000/10v in place of 1000/6.3v successfully on two
    >> or three boards now.

    >
    > I used a DSE one to fix my graphics card but I cant determine if it is low
    > esr or not so will change it for a jaycar one, if Im buying 11 might as
    > well buy 14.
    >
    >> In fact I've cleaned a lot of writeoff's up over the last couple of weeks
    >> including powersupplies with Jaycars range.
    >>
    >> It's finding replacements for the tall thin Lytic's that may prove
    >> difficult (if they turn out to be duds, none yet)
    >>
    >> Cheers
    >> Paul.

    >
    > Which type of PSUs? Both my 350watt Enermax's stopping working within
    > weeks of each other.....Tempted to open them up and see if it is a failed
    > cap.
    >
    > regards
    >
    > Thing
    >
    >
    >
    >
    >



    T'g
    I wouldn't bother with changing the Graphics card cap. I put a couple of dse
    2700/25v caps over my ESR meter and they showed up within a few points of a
    supposedly low esr equivalent.

    The PSU's were branded 'Pro-V" 300W ATX.
    An interesting side light is I opened a couple of Power Supplies from PC's
    supplied early 2001 i.e. begining of the run for that model. No cap problems
    in those ones, but there were different brands in place of the troublesome
    ones on the later supplies. Me thinks price got the better of some exec.


    cheers
    Paul.
    PC, Nov 16, 2005
    #8
  9. thingy

    Morris Guest

    "colinco" <> wrote in message
    news:...
    > In article thingy says...
    > > Wellington if possible,
    > >
    > > suitable for a computer motherboard?
    > >
    > > regards
    > >
    > > Thing
    > >

    > What values? Jaycar Taranaki St have some. This has come up before
    > Google this group.


    My GOD guys.... NEVER EVER put Jaycar's hobby quality capacitors in a
    circuit..... they are the lowest of low quality devices. If you do expect to
    have trouble weeks if not days later!!!!..... i speak with experience.
    Remember too that no one gets paid doing the same job twice.

    I ALWAYS buy my lytic caps out of TradeTech or bite the bullet and use
    Farnel (or (RS Components) paying a higher price but the device quality is
    light years ahead of the rubbish Jaycar and Dick Smiths are carrying...

    Morris
    Morris, Nov 18, 2005
    #9
  10. thingy

    XP Guest

    On Sat, 19 Nov 2005 09:32:35 +1300, "Morris"
    <> wrote:

    >
    >"colinco" <> wrote in message
    >news:...
    >> In article thingy says...
    >> > Wellington if possible,
    >> >
    >> > suitable for a computer motherboard?
    >> >
    >> > regards
    >> >
    >> > Thing
    >> >

    >> What values? Jaycar Taranaki St have some. This has come up before
    >> Google this group.

    >
    >My GOD guys.... NEVER EVER put Jaycar's hobby quality capacitors in a
    >circuit..... they are the lowest of low quality devices. If you do expect to
    >have trouble weeks if not days later!!!!..... i speak with experience.
    >Remember too that no one gets paid doing the same job twice.
    >
    >I ALWAYS buy my lytic caps out of TradeTech or bite the bullet and use
    >Farnel (or (RS Components) paying a higher price but the device quality is
    >light years ahead of the rubbish Jaycar and Dick Smiths are carrying...
    >
    >Morris
    >
    >




    TradeTech to my knowledge do not sell low ESR Caps..
    XP, Nov 19, 2005
    #10
  11. thingy

    PC Guest

    "XP" <> wrote in message
    news:...
    > On Sat, 19 Nov 2005 09:32:35 +1300, "Morris"
    > <> wrote:
    >
    >>
    >>"colinco" <> wrote in message
    >>news:...
    >>> In article thingy says...
    >>> > Wellington if possible,
    >>> >
    >>> > suitable for a computer motherboard?
    >>> >
    >>> > regards
    >>> >
    >>> > Thing
    >>> >
    >>> What values? Jaycar Taranaki St have some. This has come up before
    >>> Google this group.

    >>
    >>My GOD guys.... NEVER EVER put Jaycar's hobby quality capacitors in a
    >>circuit..... they are the lowest of low quality devices. If you do expect
    >>to
    >>have trouble weeks if not days later!!!!..... i speak with experience.
    >>Remember too that no one gets paid doing the same job twice.
    >>
    >>I ALWAYS buy my lytic caps out of TradeTech or bite the bullet and use
    >>Farnel (or (RS Components) paying a higher price but the device quality is
    >>light years ahead of the rubbish Jaycar and Dick Smiths are carrying...
    >>
    >>Morris
    >>
    >>

    >
    >
    >
    > TradeTech to my knowledge do not sell low ESR Caps..
    >
    >


    Sigh

    Wogers wong again!


    Trade Tech http://www.tradetech.co.nz/parts.php & do a search for 'esr' on
    passive components.

    Part Number Description
    C100L10 10uF/100V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C10L1000 1000uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C10L1500 1500uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C10L2200 2200uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C10L3300 3300uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C25L1000 1000uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C25L220 220uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C25L2200 2200uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C35L220 220uF/35V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C400L1 1uF/400V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C6.3L1000 1000uF/6.3V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C63L10 10uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C63L100 100uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C63L22 22uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    C63L47 47uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP

    PeeCee
    PC, Nov 19, 2005
    #11
  12. thingy

    XP Guest

    On Sat, 19 Nov 2005 22:56:28 +1300, "PC" <> wrote:

    >"XP" <> wrote in message
    >news:...
    >> On Sat, 19 Nov 2005 09:32:35 +1300, "Morris"
    >> <> wrote:
    >>
    >>>
    >>>"colinco" <> wrote in message
    >>>news:...
    >>>> In article thingy says...
    >>>> > Wellington if possible,
    >>>> >
    >>>> > suitable for a computer motherboard?
    >>>> >
    >>>> > regards
    >>>> >
    >>>> > Thing
    >>>> >
    >>>> What values? Jaycar Taranaki St have some. This has come up before
    >>>> Google this group.
    >>>
    >>>My GOD guys.... NEVER EVER put Jaycar's hobby quality capacitors in a
    >>>circuit..... they are the lowest of low quality devices. If you do expect
    >>>to
    >>>have trouble weeks if not days later!!!!..... i speak with experience.
    >>>Remember too that no one gets paid doing the same job twice.
    >>>
    >>>I ALWAYS buy my lytic caps out of TradeTech or bite the bullet and use
    >>>Farnel (or (RS Components) paying a higher price but the device quality is
    >>>light years ahead of the rubbish Jaycar and Dick Smiths are carrying...
    >>>
    >>>Morris
    >>>
    >>>

    >>
    >>
    >>
    >> TradeTech to my knowledge do not sell low ESR Caps..
    >>
    >>

    >
    >Sigh
    >
    >Wogers wong again!
    >
    >
    >Trade Tech http://www.tradetech.co.nz/parts.php & do a search for 'esr' on
    >passive components.
    >
    > Part Number Description
    >C100L10 10uF/100V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C10L1000 1000uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C10L1500 1500uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C10L2200 2200uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C10L3300 3300uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C25L1000 1000uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C25L220 220uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C25L2200 2200uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C35L220 220uF/35V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C400L1 1uF/400V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C6.3L1000 1000uF/6.3V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C63L10 10uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C63L100 100uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C63L22 22uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >C63L47 47uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >
    >PeeCee
    >




    No I am NOT


    These Cap are not suitable for PC's and you will find quite large and
    generally not a good brand, I should I am in the Trade..
    XP, Nov 19, 2005
    #12
  13. thingy

    ~misfit~ Guest

    PC wrote:
    > "XP" <> wrote in message
    > news:...
    >> TradeTech to my knowledge do not sell low ESR Caps..

    >
    > Sigh
    >
    > Wogers wong again!


    <Snip TradeTech's extensive list of low ESR caps>

    LOL, he's not actually. He said "to my knowledge". We all know how limited
    that is.
    --
    ~misfit~
    ~misfit~, Nov 19, 2005
    #13
  14. thingy

    PC Guest

    "XP" <> wrote in message
    news:...
    > On Sat, 19 Nov 2005 22:56:28 +1300, "PC" <> wrote:
    >
    >>"XP" <> wrote in message
    >>news:...
    >>> On Sat, 19 Nov 2005 09:32:35 +1300, "Morris"
    >>> <> wrote:
    >>>
    >>>>
    >>>>"colinco" <> wrote in message
    >>>>news:...
    >>>>> In article thingy says...
    >>>>> > Wellington if possible,
    >>>>> >
    >>>>> > suitable for a computer motherboard?
    >>>>> >
    >>>>> > regards
    >>>>> >
    >>>>> > Thing
    >>>>> >
    >>>>> What values? Jaycar Taranaki St have some. This has come up before
    >>>>> Google this group.
    >>>>
    >>>>My GOD guys.... NEVER EVER put Jaycar's hobby quality capacitors in a
    >>>>circuit..... they are the lowest of low quality devices. If you do
    >>>>expect
    >>>>to
    >>>>have trouble weeks if not days later!!!!..... i speak with experience.
    >>>>Remember too that no one gets paid doing the same job twice.
    >>>>
    >>>>I ALWAYS buy my lytic caps out of TradeTech or bite the bullet and use
    >>>>Farnel (or (RS Components) paying a higher price but the device quality
    >>>>is
    >>>>light years ahead of the rubbish Jaycar and Dick Smiths are carrying...
    >>>>
    >>>>Morris
    >>>>
    >>>>
    >>>
    >>>
    >>>
    >>> TradeTech to my knowledge do not sell low ESR Caps..
    >>>
    >>>

    >>
    >>Sigh
    >>
    >>Wogers wong again!
    >>
    >>
    >>Trade Tech http://www.tradetech.co.nz/parts.php & do a search for 'esr'
    >>on
    >>passive components.
    >>
    >> Part Number Description
    >>C100L10 10uF/100V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C10L1000 1000uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C10L1500 1500uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C10L2200 2200uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C10L3300 3300uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C25L1000 1000uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C25L220 220uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C25L2200 2200uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C35L220 220uF/35V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C400L1 1uF/400V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C6.3L1000 1000uF/6.3V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C63L10 10uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C63L100 100uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C63L22 22uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>C63L47 47uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>
    >>PeeCee
    >>

    >
    >
    >
    > No I am NOT
    >
    >
    > These Cap are not suitable for PC's and you will find quite large and
    > generally not a good brand, I should I am in the Trade..
    >
    >
    >
    >



    Even louder 'sigh'

    Wogers statement was "TradeTech to my knowledge do not sell low ESR Caps.."
    The reply to that post was a pointer to just such product on TradeTech's
    website.

    Surely that means 'Woger' was 'w(r)ong' !
    And as for the implication the product is inferior, oh I see it's a reply to
    another post.

    (snigger)
    Wogers wong again!

    Pee Cee
    PC, Nov 19, 2005
    #14
  15. thingy

    XP Guest

    On Wed, 16 Nov 2005 10:00:44 +1300, thing2 <> wrote:

    >colinco wrote:
    >> In article thingy says...
    >>
    >>>Wellington if possible,
    >>>
    >>>suitable for a computer motherboard?
    >>>
    >>>regards
    >>>
    >>>Thing
    >>>

    >>
    >> What values? Jaycar Taranaki St have some. This has come up before
    >> Google this group.

    >
    >Thanks, it looks like only the one size has gone...
    >
    >Jaycar has some of them....1000uF 6.3 volt about 14....so the 10v ones I
    >guess......though they have 16v....but size will be an issue....rated at
    >105 C....
    >
    >regards
    >
    >Thing




    The ONLY Good Low ESR Cap to get ARE MADE in JAPAN..

    I fact one of the MoBo board makers now state that, Rubicon Brand..
    XP, Nov 20, 2005
    #15
  16. thingy

    Jerry Guest

    PC wrote:
    > "XP" <> wrote in message
    > news:...
    >
    >>On Sat, 19 Nov 2005 22:56:28 +1300, "PC" <> wrote:
    >>
    >>
    >>>"XP" <> wrote in message
    >>>news:...
    >>>
    >>>>On Sat, 19 Nov 2005 09:32:35 +1300, "Morris"
    >>>><> wrote:
    >>>>
    >>>>
    >>>>>"colinco" <> wrote in message
    >>>>>news:...
    >>>>>
    >>>>>>In article thingy says...
    >>>>>>
    >>>>>>>Wellington if possible,
    >>>>>>>
    >>>>>>>suitable for a computer motherboard?
    >>>>>>>
    >>>>>>>regards
    >>>>>>>
    >>>>>>>Thing
    >>>>>>>
    >>>>>>
    >>>>>>What values? Jaycar Taranaki St have some. This has come up before
    >>>>>>Google this group.
    >>>>>
    >>>>>My GOD guys.... NEVER EVER put Jaycar's hobby quality capacitors in a
    >>>>>circuit..... they are the lowest of low quality devices. If you do
    >>>>>expect
    >>>>>to
    >>>>>have trouble weeks if not days later!!!!..... i speak with experience.
    >>>>>Remember too that no one gets paid doing the same job twice.
    >>>>>
    >>>>>I ALWAYS buy my lytic caps out of TradeTech or bite the bullet and use
    >>>>>Farnel (or (RS Components) paying a higher price but the device quality
    >>>>>is
    >>>>>light years ahead of the rubbish Jaycar and Dick Smiths are carrying...
    >>>>>
    >>>>>Morris
    >>>>>
    >>>>>
    >>>>
    >>>>
    >>>>
    >>>>TradeTech to my knowledge do not sell low ESR Caps..
    >>>>
    >>>>
    >>>
    >>>Sigh
    >>>
    >>>Wogers wong again!
    >>>
    >>>
    >>>Trade Tech http://www.tradetech.co.nz/parts.php & do a search for 'esr'
    >>>on
    >>>passive components.
    >>>
    >>> Part Number Description
    >>>C100L10 10uF/100V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C10L1000 1000uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C10L1500 1500uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C10L2200 2200uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C10L3300 3300uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C25L1000 1000uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C25L220 220uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C25L2200 2200uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C35L220 220uF/35V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C400L1 1uF/400V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C6.3L1000 1000uF/6.3V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C63L10 10uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C63L100 100uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C63L22 22uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>C63L47 47uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>
    >>>PeeCee
    >>>

    >>
    >>
    >>
    >>No I am NOT
    >>
    >>
    >>These Cap are not suitable for PC's and you will find quite large and
    >>generally not a good brand, I should I am in the Trade..
    >>
    >>
    >>
    >>

    >
    >
    >
    > Even louder 'sigh'
    >
    > Wogers statement was "TradeTech to my knowledge do not sell low ESR Caps.."
    > The reply to that post was a pointer to just such product on TradeTech's
    > website.
    >
    > Surely that means 'Woger' was 'w(r)ong' !
    > And as for the implication the product is inferior, oh I see it's a reply to
    > another post.
    >
    > (snigger)
    > Wogers wong again!
    >
    > Pee Cee


    but since the original poster said "suitable for a computer motherboard"
    then Roger was correct in his post related to the original question.
    Jerry, Nov 20, 2005
    #16
  17. thingy

    PC Guest

    "Jerry" <> wrote in message
    news:...
    > PC wrote:
    >> "XP" <> wrote in message
    >> news:...
    >>
    >>>On Sat, 19 Nov 2005 22:56:28 +1300, "PC" <> wrote:
    >>>
    >>>
    >>>>"XP" <> wrote in message
    >>>>news:...
    >>>>
    >>>>>On Sat, 19 Nov 2005 09:32:35 +1300, "Morris"
    >>>>><> wrote:
    >>>>>
    >>>>>
    >>>>>>"colinco" <> wrote in message
    >>>>>>news:...
    >>>>>>
    >>>>>>>In article thingy says...
    >>>>>>>
    >>>>>>>>Wellington if possible,
    >>>>>>>>
    >>>>>>>>suitable for a computer motherboard?
    >>>>>>>>
    >>>>>>>>regards
    >>>>>>>>
    >>>>>>>>Thing
    >>>>>>>>
    >>>>>>>
    >>>>>>>What values? Jaycar Taranaki St have some. This has come up before
    >>>>>>>Google this group.
    >>>>>>
    >>>>>>My GOD guys.... NEVER EVER put Jaycar's hobby quality capacitors in a
    >>>>>>circuit..... they are the lowest of low quality devices. If you do
    >>>>>>expect
    >>>>>>to
    >>>>>>have trouble weeks if not days later!!!!..... i speak with experience.
    >>>>>>Remember too that no one gets paid doing the same job twice.
    >>>>>>
    >>>>>>I ALWAYS buy my lytic caps out of TradeTech or bite the bullet and use
    >>>>>>Farnel (or (RS Components) paying a higher price but the device
    >>>>>>quality is
    >>>>>>light years ahead of the rubbish Jaycar and Dick Smiths are
    >>>>>>carrying...
    >>>>>>
    >>>>>>Morris
    >>>>>>
    >>>>>>
    >>>>>
    >>>>>
    >>>>>
    >>>>>TradeTech to my knowledge do not sell low ESR Caps..
    >>>>>
    >>>>>
    >>>>
    >>>>Sigh
    >>>>
    >>>>Wogers wong again!
    >>>>
    >>>>
    >>>>Trade Tech http://www.tradetech.co.nz/parts.php & do a search for 'esr'
    >>>>on
    >>>>passive components.
    >>>>
    >>>> Part Number Description
    >>>>C100L10 10uF/100V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C10L1000 1000uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C10L1500 1500uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C10L2200 2200uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C10L3300 3300uF/10V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C25L1000 1000uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C25L220 220uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C25L2200 2200uF/25V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C35L220 220uF/35V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C400L1 1uF/400V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C6.3L1000 1000uF/6.3V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C63L10 10uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C63L100 100uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C63L22 22uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>C63L47 47uF/63V 105deg LOW ESR (IMPEDANCE) ELECT CAP
    >>>>
    >>>>PeeCee
    >>>>
    >>>
    >>>
    >>>
    >>>No I am NOT
    >>>
    >>>
    >>>These Cap are not suitable for PC's and you will find quite large and
    >>>generally not a good brand, I should I am in the Trade..
    >>>
    >>>
    >>>
    >>>

    >>
    >>
    >>
    >> Even louder 'sigh'
    >>
    >> Wogers statement was "TradeTech to my knowledge do not sell low ESR
    >> Caps.."
    >> The reply to that post was a pointer to just such product on TradeTech's
    >> website.
    >>
    >> Surely that means 'Woger' was 'w(r)ong' !
    >> And as for the implication the product is inferior, oh I see it's a reply
    >> to another post.
    >>
    >> (snigger)
    >> Wogers wong again!
    >>
    >> Pee Cee

    >
    > but since the original poster said "suitable for a computer motherboard"
    > then Roger was correct in his post related to the original question.



    Jerry

    Then Woger should have posted to the OP, my observation was the 'inferior'
    comment was not relevant to anything in the 'Trade Tech do not sell ESR
    Caps' rebuttal. :)


    PeeCee
    PC, Nov 20, 2005
    #17
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Alfred Molon

    Vertical capacitors for image sensors

    Alfred Molon, Jun 5, 2006, in forum: Digital Photography
    Replies:
    19
    Views:
    513
  2. Barry

    Electrolytic Capacitors

    Barry, May 25, 2007, in forum: Computer Support
    Replies:
    9
    Views:
    955
    Ponder
    May 26, 2007
  3. The GHOST of WOGER.

    The Reason for Low ESR Elect Caps..

    The GHOST of WOGER., Jul 15, 2004, in forum: NZ Computing
    Replies:
    2
    Views:
    457
    Ron McNulty
    Jul 17, 2004
  4. bambam

    Bad Capacitors

    bambam, Nov 7, 2004, in forum: NZ Computing
    Replies:
    33
    Views:
    1,267
  5. ~misfit~

    Help with capacitors please..

    ~misfit~, Aug 18, 2006, in forum: NZ Computing
    Replies:
    63
    Views:
    1,256
    Don Hills
    Oct 18, 2006
Loading...

Share This Page