Warnings and Error messages

Discussion in 'Computer Support' started by ChairMan, May 10, 2007.

  1. ChairMan

    ChairMan Guest

    I recently started getting a Windows Delayed WRITE Failed warning on a IDE
    slave drive. Upon reading the eeror event logs I guessed the drive was going
    bad based on MS help center. So I got a new drive, new cable but still have
    the same problems except with a
    new twist.
    After booting up everything is fine no error messages, after about 20-30
    minutes or less the event viewer starts showing warnings/ disk and
    ftdisk,then a couple of plug and play manager errors and then the drive just
    dissappears until I reboot then it shows up again. The only thing the MS
    help center says is to use the applet to remove the device properly. It's
    not a USB drive, it's a IDE, so WTF is the plug and play deal.
    Here's the errors from the event viewer.
    Anybody?
    This is making me crazy/crazier
    TIA


    Event Type: Warning
    Event Source: Ftdisk
    Event Category: Disk
    Event ID: 57
    Date: 05/10/07
    Time: 12:40:58 AM
    User: N/A
    Computer:
    Description:
    The system failed to flush data to the transaction log. Corruption may
    occur.

    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00 01 00 be 00 ......¾.
    0008: 02 00 00 00 39 00 04 80 ....9..?
    0010: 00 00 00 00 0e 00 00 c0 .......À
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........


    *********

    Event Type: Error
    Event Source: PlugPlayManager
    Event Category: None
    Event ID: 12
    Date: 05/10/07
    Time: 12:40:58 AM
    User: N/A
    Computer:
    Description:
    The device 'WDC WD2000JB-00REA0'
    (IDE\DiskWDC_WD2000JB-00REA0_____________________20.00K20\5&1a19421f&1&0.1.0)
    disappeared from the system without first being prepared for removal.

    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00 ....


    *********


    Event Type: Warning
    Event Source: Disk
    Event Category: None
    Event ID: 51
    Date: 05/10/07
    Time: 12:40:58 AM
    User: N/A
    Computer:
    Description:
    An error was detected on device \Device\Harddisk0\D during a paging
    operation.

    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 04 00 68 00 01 00 b6 00 ..h...¶.
    0008: 00 00 00 00 33 00 04 80 ....3..?
    0010: 2d 01 00 00 0e 00 00 c0 -......À
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........
    0028: d7 f7 05 00 00 00 00 00 ×÷......
    0030: ff ff ff ff 01 00 00 00 ÿÿÿÿ....
    0038: 40 00 00 08 00 00 01 00 @.......
    0040: 00 20 0a 12 80 01 20 40 . ..?. @
    0048: 00 10 00 00 0a 00 00 00 ........
    0050: 00 80 16 86 f0 a9 35 87 .?.?ð©5?
    0058: 00 00 00 00 08 e0 2c 86 .....à,?
    0060: 00 00 00 00 37 00 5e 00 ....7.^.
    0068: 2a 00 00 5e 00 37 00 00 *..^.7..
    0070: 08 00 00 00 00 00 00 00 ........
    0078: 00 00 00 00 00 00 00 00 ........
    0080: 00 00 00 00 00 00 00 00 ........
    0088: 00 00 00 00 00 00 00 00 ........


    *********

    Event Type: Warning
    Event Source: Disk
    Event Category: None
    Event ID: 34
    Date: 05/09/07
    Time: 11:56:47 PM
    User: N/A
    Computer:
    Description:
    The driver disabled the write cache on device \Device\Harddisk0\DR9.

    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 0f 00 04 00 01 00 62 00 ......b.
    0008: 00 00 00 00 22 00 04 80 ...."..?
    0010: 01 00 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........
    0028: 00 00 00 00 ....








    --
    ***
    Never Forget
    http://www.gunstuff.com/america-attacked.html
    ChairMan, May 10, 2007
    #1
    1. Advertising

  2. ChairMan

    Guest

    "ChairMan" <> wrote:

    >Here's the errors from the event viewer.
    >Anybody?
    >This is making me crazy/crazier
    >TIA


    >Event Type: Warning
    >Event Source: Ftdisk
    >Event Category: Disk
    >Event ID: 57
    >Date: 05/10/07
    >Time: 12:40:58 AM
    >User: N/A
    >Computer:
    >Description:
    >The system failed to flush data to the transaction log. Corruption may
    >occur.


    Try this and see if it helps.

    With Explorer, right click C:\ drive, Properties, Hardware, double
    click on your HD, Policies:
    Disable write caching



    --
    Paperback Writer
    http://youtube.com/watch?v=nmF7wb2pIiM
    , May 11, 2007
    #2
    1. Advertising

  3. ChairMan

    ChairMan Guest

    In news:,
    <>spewed forth:
    > "ChairMan" <> wrote:
    >
    >> Here's the errors from the event viewer.
    >> Anybody?
    >> This is making me crazy/crazier
    >> TIA

    >
    >> Event Type: Warning
    >> Event Source: Ftdisk
    >> Event Category: Disk
    >> Event ID: 57
    >> Date: 05/10/07
    >> Time: 12:40:58 AM
    >> User: N/A
    >> Computer:
    >> Description:
    >> The system failed to flush data to the transaction log. Corruption
    >> may occur.

    >
    > Try this and see if it helps.
    >
    > With Explorer, right click C:\ drive, Properties, Hardware, double
    > click on your HD, Policies:
    > Disable write caching


    Already tried that and no change
    ChairMan, May 11, 2007
    #3
  4. ChairMan

    Guest

    "ChairMan" <> wrote:

    >In news:,
    > <>spewed forth:
    >> "ChairMan" <> wrote:
    >>
    >>> Here's the errors from the event viewer.
    >>> Anybody?
    >>> This is making me crazy/crazier
    >>> TIA

    >>
    >>> Event Type: Warning
    >>> Event Source: Ftdisk
    >>> Event Category: Disk
    >>> Event ID: 57
    >>> Date: 05/10/07
    >>> Time: 12:40:58 AM
    >>> User: N/A
    >>> Computer:
    >>> Description:
    >>> The system failed to flush data to the transaction log. Corruption
    >>> may occur.

    >>
    >> Try this and see if it helps.
    >>
    >> With Explorer, right click C:\ drive, Properties, Hardware, double
    >> click on your HD, Policies:
    >> Disable write caching


    >Already tried that and no change


    Then download and run Process Monitor
    http://www.microsoft.com/technet/sysinternals/utilities/processmonitor.mspx
    shorter http://tinyurl.com/yg9wqs

    Use the filters and filter all but explorer.

    Your looking for faultrep.dll you can search for it in the output.

    faultrep.dll has something to do with windows error reporting.

    But find that DLL and your error is above it, and not far.


    --
    Superstar
    http://youtube.com/watch?v=zc3C4zDdOXk
    , May 11, 2007
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Replies:
    2
    Views:
    434
    David Harrison
    Oct 13, 2005
  2. Replies:
    2
    Views:
    1,479
  3. Shawn Westerhoff
    Replies:
    6
    Views:
    1,917
    Walter Roberson
    Oct 29, 2003
  4. KerplunKuK

    Secure and non secure warnings

    KerplunKuK, Aug 24, 2004, in forum: Computer Support
    Replies:
    8
    Views:
    533
    Blinky the Shark
    Aug 24, 2004
  5. Anteaus

    Standby, wireless and nuisance warnings.

    Anteaus, Feb 27, 2010, in forum: Wireless Networking
    Replies:
    2
    Views:
    1,206
    Anteaus
    Feb 28, 2010
Loading...

Share This Page