WAN Link or IOS or Configuration issue

Discussion in 'Cisco' started by bensonlei@yahoo.com.hk, Feb 7, 2011.

  1. Guest

    Hi,

    A WAN Link as below:
    HQ ( VLAN1) ----[ ]
    [ MetroEthernet ]----Remote
    [ Network ] site ( VLAN1 & VLAN2)
    HQ ( VLAN2) ----[ ]


    Router configuration for both locations: ( VLAN1 or VLAN 2 )

    interface GigabitEthernet0/1.xxx
    bandwidth 5000
    encapsulation dot1Q xxxx
    ip address 10.10.yy.zz 255.255.255.252
    ip flow ingress
    no ip mroute-cache
    ip ospf cost 10
    traffic-shape rate 5000000 5000000 5000000 1000
    !

    Issue:
    Both VLAN1 & VLAN2 has not problem for OSPF routing, neighbor,,,,

    VLAN1 is working perfectly, but VLAN2 can only ping/traceroute to the
    connected interface and can not ping to other interface even routes
    are found in the routing table.

    Any hint for this issue ( configuration, IOS or ISP issue ) ?
    How to fix this problem ? and suggested steps/hints to find out the
    problem ?



    Cheers
    , Feb 7, 2011
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. kev
    Replies:
    4
    Views:
    471
    Scooby
    Nov 17, 2003
  2. AM
    Replies:
    1
    Views:
    551
    Phillip Remaker
    May 24, 2005
  3. Casper
    Replies:
    1
    Views:
    536
    headsetadapter.com
    Aug 17, 2007
  4. WAN Link issue

    , Feb 3, 2011, in forum: Cisco
    Replies:
    0
    Views:
    413
  5. Martin Gallagher
    Replies:
    0
    Views:
    494
    Martin Gallagher
    Nov 27, 2012
Loading...

Share This Page