VPN with Linksys & Cisco 2621

Discussion in 'Cisco' started by Tim Schultz, Oct 5, 2004.

  1. Tim Schultz

    Tim Schultz Guest

    I'm trying to set up a LAN to LAN IPSec tunnel to a Cisco 2621 router (IOS
    12.3 (10) ). I'm initiating the tunnel from a Linkys BEFVP41 cable/dsl vpn
    router with a dynamic IP address. I'd like to set up pre-shared keys for
    phase 1 (isakmp/IKE) and have multiple dynamic endpoints (Linksys befvp41's)
    using different pre-shared keys. Anybody have any success with a setup such
    as this or similar to this with another non-Cisco brand of vpn cable/dsl
    router?

    I've tried going to a RADIUS server to store the keys, but aggressive mode
    seems to be tripping me up. The Linksys seems to be unable to have a
    user-fqdn or hostname defined. I've put this into the Linksys in the
    "username:" and seemed to have worked but aggressive mode is still returning
    "payload malformed" errors. Keys are correct.

    The "isakmp profiles" using keyrings don't seem to work either.

    Any helpful hints would be much appreciated...
    Tim Schultz, Oct 5, 2004
    #1
    1. Advertising

  2. Tim Schultz

    Guest

    Tim Schultz wrote:
    > I'm trying to set up a LAN to LAN IPSec tunnel to a Cisco 2621 router

    (IOS
    > 12.3 (10) ). I'm initiating the tunnel from a Linkys BEFVP41

    cable/dsl vpn
    > router with a dynamic IP address. I'd like to set up pre-shared keys

    for
    > phase 1 (isakmp/IKE) and have multiple dynamic endpoints (Linksys

    befvp41's)
    > using different pre-shared keys. Anybody have any success with a

    setup such
    > as this or similar to this with another non-Cisco brand of vpn

    cable/dsl
    > router?
    >
    > I've tried going to a RADIUS server to store the keys, but aggressive

    mode
    > seems to be tripping me up. The Linksys seems to be unable to have a
    > user-fqdn or hostname defined. I've put this into the Linksys in the
    > "username:" and seemed to have worked but aggressive mode is still

    returning
    > "payload malformed" errors. Keys are correct.
    >
    > The "isakmp profiles" using keyrings don't seem to work either.
    >
    > Any helpful hints would be much appreciated...



    Yes, I posted a config to this Aug 15 2003 search for "Linksys to Cisco
    PIX VPN Setup" also search for another post I made Jul 21 2004.

    Ted
    , Dec 10, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Olav Langeland

    Cisco 2621 with AIM-VPN performance?

    Olav Langeland, Aug 22, 2003, in forum: Cisco
    Replies:
    2
    Views:
    989
    Ghazan Haider
    Sep 8, 2003
  2. Replies:
    2
    Views:
    2,464
  3. spencerwill.com
    Replies:
    2
    Views:
    4,201
    Peter
    May 26, 2005
  4. sphealey
    Replies:
    4
    Views:
    2,284
  5. Rick Bruner
    Replies:
    5
    Views:
    929
    Rick Bruner
    Oct 27, 2006
Loading...

Share This Page