VPN usage after upgrading PIX 506E

Discussion in 'Cisco' started by jaisol, May 7, 2005.

  1. jaisol

    jaisol Guest

    Before to upgrade Firewall version and PDM I was using VPN perfectly.
    Once upgraded I can connect with VPN.

    Show ver before upgrade:

    Cisco PIX Firewall Version 6.1(2)
    Cisco PIX Device Manager Version 1.1(2)
    Compiled on Fri 16-Nov-01 14:28 by morlee
    Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
    Flash E28F640J3 @ 0x300, 8MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32KB
    0: ethernet0: address is 0009.b718.b578, irq 10
    1: ethernet1: address is 0009.b718.b579, irq 11
    Licensed Features:
    Failover: Disabled
    VPN-DES: Enabled
    VPN-3DES: Disabled
    Maximum Interfaces: 2
    Cut-through Proxy: Enabled
    Guards: Enabled
    Websense: Enabled
    Inside Hosts: Unlimited
    Throughput: Unlimited
    ISAKMP peers: Unlimited

    Show ver after upgrade:

    Cisco PIX Firewall Version 6.3(4)
    Cisco PIX Device Manager Version 3.0(2)
    Compiled on Fri 02-Jul-04 00:07 by morlee
    pixfirewall up 1 day 23 hours
    Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHz
    Flash E28F640J3 @ 0x300, 8MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32KB
    0: ethernet0: address is 0009.b718.b578, irq 10
    1: ethernet1: address is 0009.b718.b579, irq 11
    Licensed Features:
    Failover: Disabled
    VPN-DES: Enabled
    VPN-3DES-AES: Disabled
    Maximum Physical Interfaces: 2
    Maximum Interfaces: 2
    Cut-through Proxy: Enabled
    Guards: Enabled
    URL-filtering: Enabled
    Inside Hosts: Unlimited
    Throughput: Unlimited
    IKE peers: Unlimited

    After upgrade I don't have change configuration.

    How can I resolve it?

    THANKS!
     
    jaisol, May 7, 2005
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. jaisol
    Replies:
    1
    Views:
    3,776
    Walter Roberson
    May 5, 2005
  2. jaisol
    Replies:
    3
    Views:
    580
    Chris
    May 8, 2005
  3. jaisol
    Replies:
    3
    Views:
    468
    Jyri Korhonen
    May 13, 2005
  4. Jerry Gardner

    Upgrading Memory on PIX 506E

    Jerry Gardner, Nov 19, 2005, in forum: Cisco
    Replies:
    0
    Views:
    1,733
    Jerry Gardner
    Nov 19, 2005
  5. Mike
    Replies:
    3
    Views:
    532
Loading...

Share This Page